Pramet 150N3R177C125-ISOD05-C 7546856 End Milling Cutter - Face
- Write a review
$425.68
Axial rake angle (GAMP)-7Clamping Type Code (MTP)Screw clamping through holeConnection diameter - inch (DCON MS)1.25Connection diameter - millimeter (DCON MS)31.8Coolant supply property (CSP)1Cutting diameter - inch (DC)1.209Cutting diameter - millimeter (DC)30.7Cutting diameter maximum - inch (DCX)1.5Cutting diameter maximum - millimeter (DCX)38.1Hand (Cutting direction)RightOverall length - inch (OAL)6Overall length - millimeter (OAL)152Peripheral effective cutting edge count (ZEFP)3Radial rake angle (GAMF)8Rotational speed maximum (RPMX)15800ShankCylindrical shank DIN 1835ATool cutting edge angle (KAPR)45Usable Length - inch (LU)1.772
Specifications
| Axial rake angle (GAMP) | -7 |
| Clamping Type Code (MTP) | Screw clamping through hole |
| Connection diameter - inch (DCON MS) | 1.25 |
| Connection diameter - millimeter (DCON MS) | 31.8 |
| Coolant supply property (CSP) | 1 |
| Cutting diameter - inch (DC) | 1.209 |
| Cutting diameter - millimeter (DC) | 30.7 |
| Cutting diameter maximum - inch (DCX) | 1.5 |
| Cutting diameter maximum - millimeter (DCX) | 38.1 |
| Hand (Cutting direction) | Right |
| Overall length - inch (OAL) | 6 |
| Overall length - millimeter (OAL) | 152 |
| Peripheral effective cutting edge count (ZEFP) | 3 |
| Radial rake angle (GAMF) | 8 |
| Rotational speed maximum (RPMX) | 15800 |
| Shank | Cylindrical shank DIN 1835A |
| Tool cutting edge angle (KAPR) | 45 |
| Usable Length - inch (LU) | 1.772 |
7546856