Dormer C80025.0X14.0 5985507 T-slot Cutter 25.00 mm x 14.0 mm
- Write a review
$238.90
Basic StandardDIN 851CoatingBrightConnection diameter - inch (DCON MS)0.6299Connection diameter - millimeter (DCON MS)16Cutting diameter - inch (DC)0.9843Cutting diameter - millimeter (DC)25Cutting diameter tolerance class (TCDC)d11Cutting width - inch (CW)0.4331Cutting width - millimeter (CW)11Depth of cut maximum - inch (APMX)0.4331Depth of cut maximum - millimeter (APMX)11EDP number74480Flute count (NOF)8Flute helix angle (FHA)15Head length - millimeter (LH)31MaterialHSS-EMID number5985507Mill ProfileN - General Purpose Cutter Type for Low to High Resistance MaterialsNeck diameter - inch (DN)0.4724Neck diameter - millimeter (DN)12Ordering code ANSIC80025.0X14.0Overall length - inch (OAL)3.2283Overall length - millimeter (OAL)82Peripheral effective cutting edge count (ZEFP)8Radial rake angle (GAMF)10ShankCylindrical shank DIN 1835 B / D
Specifications
| Basic Standard | DIN 851 |
| Coating | Bright |
| Connection diameter - inch (DCON MS) | 0.6299 |
| Connection diameter - millimeter (DCON MS) | 16 |
| Cutting diameter - inch (DC) | 0.9843 |
| Cutting diameter - millimeter (DC) | 25 |
| Cutting diameter tolerance class (TCDC) | d11 |
| Cutting width - inch (CW) | 0.4331 |
| Cutting width - millimeter (CW) | 11 |
| Depth of cut maximum - inch (APMX) | 0.4331 |
| Depth of cut maximum - millimeter (APMX) | 11 |
| EDP number | 74480 |
| Flute count (NOF) | 8 |
| Flute helix angle (FHA) | 15 |
| Head length - millimeter (LH) | 31 |
| Material | HSS-E |
| MID number | 5985507 |
| Mill Profile | N - General Purpose Cutter Type for Low to High Resistance Materials |
| Neck diameter - inch (DN) | 0.4724 |
| Neck diameter - millimeter (DN) | 12 |
| Ordering code ANSI | C80025.0X14.0 |
| Overall length - inch (OAL) | 3.2283 |
| Overall length - millimeter (OAL) | 82 |
| Peripheral effective cutting edge count (ZEFP) | 8 |
| Radial rake angle (GAMF) | 10 |
| Shank | Cylindrical shank DIN 1835 B / D |
5985507