Dormer E545BA8 5976714 BA Machine Tap Spiral Point 3FL No.8
- Write a review
$28.02
Basic StandardISO 529Clamping Length - millimeter (LSC)5Clamping width - fractional inch (WSC)2.2Clamping width - inch0.0866CoatingSteam TemperedConnection diameter - inch (DCON MS)2.8Coolant supply property (CSP)2.2EDP number203828Flute count (NOF)3Flute Geometry (FDC)Spiral Point GeometryHand (Cutting direction)RightMaterialHSSMaterial applicationM - Stainless steel, P - Steel and cast steelMID number5976714Ordering code ANSIE545BA8Overall length - inch (OAL)1.752Overall length - millimeter (OAL)44.5Premachined hole diameter - inch (PHD)0.0709Premachined hole diameter - millimeter (PHD)1.8ShankCylindrical shank with SquareTap chamfer style (TCS)B 3.5 - 5Thread diameter - inch (TD)0.0866Thread diameter - millimeter (TD)2.2Thread diameter size (TDZ)BA 8Thread form (THFT)BA - British associationThread pitch - inch (TP)0.0169Thread pitch - millimeter (TP)0.43Threading length - inch (THL)0.374Threading length - millimeter (THL)9.5Usable length (ULDR)2.5Usable Length - inch (LU)0.374Usable Length - millimeter (LU)9.5
Specifications
| Basic Standard | ISO 529 |
| Clamping Length - millimeter (LSC) | 5 |
| Clamping width - fractional inch (WSC) | 2.2 |
| Clamping width - inch | 0.0866 |
| Coating | Steam Tempered |
| Connection diameter - inch (DCON MS) | 2.8 |
| Coolant supply property (CSP) | 2.2 |
| EDP number | 203828 |
| Flute count (NOF) | 3 |
| Flute Geometry (FDC) | Spiral Point Geometry |
| Hand (Cutting direction) | Right |
| Material | HSS |
| Material application | M - Stainless steel, P - Steel and cast steel |
| MID number | 5976714 |
| Ordering code ANSI | E545BA8 |
| Overall length - inch (OAL) | 1.752 |
| Overall length - millimeter (OAL) | 44.5 |
| Premachined hole diameter - inch (PHD) | 0.0709 |
| Premachined hole diameter - millimeter (PHD) | 1.8 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | B 3.5 - 5 |
| Thread diameter - inch (TD) | 0.0866 |
| Thread diameter - millimeter (TD) | 2.2 |
| Thread diameter size (TDZ) | BA 8 |
| Thread form (THFT) | BA - British association |
| Thread pitch - inch (TP) | 0.0169 |
| Thread pitch - millimeter (TP) | 0.43 |
| Threading length - inch (THL) | 0.374 |
| Threading length - millimeter (THL) | 9.5 |
| Usable length (ULDR) | 2.5 |
| Usable Length - inch (LU) | 0.374 |
| Usable Length - millimeter (LU) | 9.5 |
5976714
