Pramet 062E2R197C062-ISBN10-C 7455290 End Milling Cutter - High Feed
- Write a review
$282.76
Axial rake angle (GAMP)-12Clamping Type Code (MTP)Screw clamping through holeConnection diameter - inch (DCON MS)0.625Connection diameter - millimeter (DCON MS)15.9Coolant supply property (CSP)1Cutting diameter - inch (DC)0.365Cutting diameter - millimeter (DC)9.3Cutting diameter maximum - inch (DCX)0.625Cutting diameter maximum - millimeter (DCX)15.9Hand (Cutting direction)RightOverall length - inch (OAL)5.906Overall length - millimeter (OAL)150Peripheral effective cutting edge count (ZEFP)2Radial rake angle (GAMF)-10Rotational speed maximum (RPMX)31100ShankCylindrical shank DIN 1835ATool cutting edge angle (KAPR)20Usable Length - inch (LU)1.969
Specifications
| Axial rake angle (GAMP) | -12 |
| Clamping Type Code (MTP) | Screw clamping through hole |
| Connection diameter - inch (DCON MS) | 0.625 |
| Connection diameter - millimeter (DCON MS) | 15.9 |
| Coolant supply property (CSP) | 1 |
| Cutting diameter - inch (DC) | 0.365 |
| Cutting diameter - millimeter (DC) | 9.3 |
| Cutting diameter maximum - inch (DCX) | 0.625 |
| Cutting diameter maximum - millimeter (DCX) | 15.9 |
| Hand (Cutting direction) | Right |
| Overall length - inch (OAL) | 5.906 |
| Overall length - millimeter (OAL) | 150 |
| Peripheral effective cutting edge count (ZEFP) | 2 |
| Radial rake angle (GAMF) | -10 |
| Rotational speed maximum (RPMX) | 31100 |
| Shank | Cylindrical shank DIN 1835A |
| Tool cutting edge angle (KAPR) | 20 |
| Usable Length - inch (LU) | 1.969 |
7455290
