- New
2ACO9.1 016491 Jobber Drill DIN 338 9.10 mm
- Write a review
$15.61
ApplicationAngleIcon_DICT_SELDrill point 135°Basic StandardDIN 338CoatingBronzeConnection (shank) descriptionCylindrical shankConnection diameter - millimeter (DCON MS)9.1Cutting diameter - inch (DC)0.3583Cutting diameter - millimeter (DC)9.1Drill LengthJobberHand (Cutting direction)RightLength chip flute - millimeter (LCF)81Length chip flute - inch (LCF)3.189MaterialHSS-EOverall length - millimeter (OAL)125Overall length - inch (OAL)4.9213Point Angle (SIG)135Spiral formStandard SpiralSurface treatementSteam TemperedUsable length (ULDR)4
Specifications
| ApplicationAngleIcon_DICT_SEL | Drill point 135° |
| Basic Standard | DIN 338 |
| Coating | Bronze |
| Connection (shank) description | Cylindrical shank |
| Connection diameter - millimeter (DCON MS) | 9.1 |
| Cutting diameter - inch (DC) | 0.3583 |
| Cutting diameter - millimeter (DC) | 9.1 |
| Drill Length | Jobber |
| Hand (Cutting direction) | Right |
| Length chip flute - millimeter (LCF) | 81 |
| Length chip flute - inch (LCF) | 3.189 |
| Material | HSS-E |
| Overall length - millimeter (OAL) | 125 |
| Overall length - inch (OAL) | 4.9213 |
| Point Angle (SIG) | 135 |
| Spiral form | Standard Spiral |
| Surface treatement | Steam Tempered |
| Usable length (ULDR) | 4 |
2ACO9.1
