Pramet SNMM 868-HR:T9325 6754157 Turning Insert - Negative
- Write a review
$42.25
ChipbreakerHRCoatingT9325Coating processMT-CVDCoating property (CTP)1Cooling effectPositive effect on tool life - cooling is recommendedCorner radius - inch (RE)0.126Corner radius - millimeter (RE)3.2Cutting edge length - inch (L)1Cutting edge length - millimeter (L)25.4Depth of cut maximum - inch (APMX)0.551Depth of cut maximum - millimeter (APMX)14Depth of cut minimum - inch (APMN)0.197Depth of cut minimum - millimeter (APMN)5Feed maximal - millimeter1.4Feed minimal - millimeter0.6Feed_MAX_IMP_NUM0.055Feed_MIN_IMP_NUM0.024Fixing hole diameter - inch (D1)0.359Fixing hole diameter - millimeter (D1)9.12Inscribed circle diameter - inch (IC)1Inscribed circle diameter - millimeter (IC)25.4Insert thickness - millimeter (S)9.525
Specifications
| Chipbreaker | HR |
| Coating | T9325 |
| Coating process | MT-CVD |
| Coating property (CTP) | 1 |
| Cooling effect | Positive effect on tool life - cooling is recommended |
| Corner radius - inch (RE) | 0.126 |
| Corner radius - millimeter (RE) | 3.2 |
| Cutting edge length - inch (L) | 1 |
| Cutting edge length - millimeter (L) | 25.4 |
| Depth of cut maximum - inch (APMX) | 0.551 |
| Depth of cut maximum - millimeter (APMX) | 14 |
| Depth of cut minimum - inch (APMN) | 0.197 |
| Depth of cut minimum - millimeter (APMN) | 5 |
| Feed maximal - millimeter | 1.4 |
| Feed minimal - millimeter | 0.6 |
| Feed_MAX_IMP_NUM | 0.055 |
| Feed_MIN_IMP_NUM | 0.024 |
| Fixing hole diameter - inch (D1) | 0.359 |
| Fixing hole diameter - millimeter (D1) | 9.12 |
| Inscribed circle diameter - inch (IC) | 1 |
| Inscribed circle diameter - millimeter (IC) | 25.4 |
| Insert thickness - millimeter (S) | 9.525 |
6754157
