Dormer C6017/8X3/4 7647860 End Mill ANSI 7/8 inch
- Write a review
$53.83
Basic StandardANSICoatingBrightConnection diameter - fractional inch (DCON MS)3/4Connection diameter - inch (DCON MS)0.75Connection diameter - millimeter (DCON MS)19.05Cut lengthMediumCutting diameter - fractional inch (DC)7/8Cutting diameter - inch (DC)0.875Cutting diameter - millimeter (DC)22.23Cutting diameter tolerance class (TCDC)ANSI +.003/-.000Depth of cut maximum - fractional inch (APMX)1.1/2EDP number7647860Flute count (NOF)2Flute helix angle (FHA)30MaterialHSSMaterial applicationP - Steel and cast steelMID number7647860Mill ProfileN - General Purpose Cutter Type for Low to High Resistance MaterialsOrdering code ANSIC6017/8X3/4Overall length - fractional inch (OAL)4.1/8Peripheral effective cutting edge count (ZEFP)2Radial rake angle (GAMF)8ShankCylindrical shank
Specifications
| Basic Standard | ANSI |
| Coating | Bright |
| Connection diameter - fractional inch (DCON MS) | 3/4 |
| Connection diameter - inch (DCON MS) | 0.75 |
| Connection diameter - millimeter (DCON MS) | 19.05 |
| Cut length | Medium |
| Cutting diameter - fractional inch (DC) | 7/8 |
| Cutting diameter - inch (DC) | 0.875 |
| Cutting diameter - millimeter (DC) | 22.23 |
| Cutting diameter tolerance class (TCDC) | ANSI +.003/-.000 |
| Depth of cut maximum - fractional inch (APMX) | 1.1/2 |
| EDP number | 7647860 |
| Flute count (NOF) | 2 |
| Flute helix angle (FHA) | 30 |
| Material | HSS |
| Material application | P - Steel and cast steel |
| MID number | 7647860 |
| Mill Profile | N - General Purpose Cutter Type for Low to High Resistance Materials |
| Ordering code ANSI | C6017/8X3/4 |
| Overall length - fractional inch (OAL) | 4.1/8 |
| Peripheral effective cutting edge count (ZEFP) | 2 |
| Radial rake angle (GAMF) | 8 |
| Shank | Cylindrical shank |
7647860
