Dormer E384M16X1.5 6305871 Machine Tap Spiral Point Blue Shark 5FL M16 x 1.50 mm
- Write a review
$63.62
Basic StandardDIN 374Clamping Length - millimeter (LSC)12Clamping width - fractional inch (WSC)9Clamping width - inch0.3543CoatingSteam TemperedConnection diameter - inch (DCON MS)12EDP number46305871Flute count (NOF)5Flute Geometry (FDC)Spiral Point GeometryHand (Cutting direction)RightMaterialHSS-E-PMMaterial applicationM - Stainless steelMID number6305871Ordering code ANSIE384M16X1.5Overall length - inch (OAL)3.937Overall length - millimeter (OAL)100Premachined hole diameter - inch (PHD)0.5709Premachined hole diameter - millimeter (PHD)14.5ShankCylindrical shank with SquareTap chamfer style (TCS)B 3.5 - 5Thread diameter size (TDZ)16Thread form (THFT)MF - Metric fineThread pitch - inch (TP)0.0591Thread pitch - millimeter (TP)1.5Threading length - inch (THL)0.8268Threading length - millimeter (THL)21Usable length (ULDR)2.5
Specifications
| Basic Standard | DIN 374 |
| Clamping Length - millimeter (LSC) | 12 |
| Clamping width - fractional inch (WSC) | 9 |
| Clamping width - inch | 0.3543 |
| Coating | Steam Tempered |
| Connection diameter - inch (DCON MS) | 12 |
| EDP number | 46305871 |
| Flute count (NOF) | 5 |
| Flute Geometry (FDC) | Spiral Point Geometry |
| Hand (Cutting direction) | Right |
| Material | HSS-E-PM |
| Material application | M - Stainless steel |
| MID number | 6305871 |
| Ordering code ANSI | E384M16X1.5 |
| Overall length - inch (OAL) | 3.937 |
| Overall length - millimeter (OAL) | 100 |
| Premachined hole diameter - inch (PHD) | 0.5709 |
| Premachined hole diameter - millimeter (PHD) | 14.5 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | B 3.5 - 5 |
| Thread diameter size (TDZ) | 16 |
| Thread form (THFT) | MF - Metric fine |
| Thread pitch - inch (TP) | 0.0591 |
| Thread pitch - millimeter (TP) | 1.5 |
| Threading length - inch (THL) | 0.8268 |
| Threading length - millimeter (THL) | 21 |
| Usable length (ULDR) | 2.5 |
6305871
