Dormer E6531/8 5978397 NPT Combi Taps Spiral Flute 27° 1/8 inch x 27
- Write a review
$56.88
Basic StandardANSIClamping width - fractional inch (WSC)0.437Clamping width - inch0.328CoatingBrightCoating property (CTP)2Connection diameter - inch (DCON MS)2.7/8Connection diameter - millimeter (DCON MS)11.1EDP number297285Flute count (NOF)27Flute Geometry (FDC)Spiral Flute GeometryFlute helix angle (FHA)27Hand (Cutting direction)RightMaterialHSSMaterial applicationP - Steel and cast steelMID number5978397Ordering code ANSIE6531/8Overall length - fractional inch (OAL)2.7/8Overall length - inch (OAL)2.875Overall length - millimeter (OAL)3/4ShankCylindrical shank with SquareThread diameter - millimeter (TD)0.3346Thread diameter size (TDZ)1/8Thread form (THFT)NPT - National taper pipeThreads per inch (TPI)27Usable length (ULDR)1.5Usable Length - fractional inch (LU)3/4
Specifications
| Basic Standard | ANSI |
| Clamping width - fractional inch (WSC) | 0.437 |
| Clamping width - inch | 0.328 |
| Coating | Bright |
| Coating property (CTP) | 2 |
| Connection diameter - inch (DCON MS) | 2.7/8 |
| Connection diameter - millimeter (DCON MS) | 11.1 |
| EDP number | 297285 |
| Flute count (NOF) | 27 |
| Flute Geometry (FDC) | Spiral Flute Geometry |
| Flute helix angle (FHA) | 27 |
| Hand (Cutting direction) | Right |
| Material | HSS |
| Material application | P - Steel and cast steel |
| MID number | 5978397 |
| Ordering code ANSI | E6531/8 |
| Overall length - fractional inch (OAL) | 2.7/8 |
| Overall length - inch (OAL) | 2.875 |
| Overall length - millimeter (OAL) | 3/4 |
| Shank | Cylindrical shank with Square |
| Thread diameter - millimeter (TD) | 0.3346 |
| Thread diameter size (TDZ) | 1/8 |
| Thread form (THFT) | NPT - National taper pipe |
| Threads per inch (TPI) | 27 |
| Usable length (ULDR) | 1.5 |
| Usable Length - fractional inch (LU) | 3/4 |
5978397
