Dormer EX01M56 5973550 Machine Tap Spiral Flute 45° 5FL M56 x 5.50 mm
- Write a review
$987.14
Basic StandardDIN 376Clamping Length - millimeter (LSC)35Clamping width - inch1.2598Clamping width - millimeter (WSC)32CoatingSteam TemperedConnection diameter - inch (DCON MS)40Connection diameter - millimeter (DCON MS)32EDP number137215Flute count (NOF)5Flute Geometry (FDC)Spiral Flute GeometryFlute helix angle (FHA)45Hand (Cutting direction)RightMaterialHSS-E-PMMaterial applicationP - Steel and cast steelMID number5973550Ordering code ANSIEX01M56Overall length - inch (OAL)9.8425Overall length - millimeter (OAL)250Premachined hole diameter - inch (PHD)1.9882Premachined hole diameter - millimeter (PHD)45ShankCylindrical shank with SquareTap chamfer style (TCS)C 2 - 3Thread diameter - millimeter (TD)50.5Thread diameter size (TDZ)56Thread form (THFT)M - Metric coarseThread pitch - inch (TP)0.2165Thread pitch - millimeter (TP)5.5Threading length - inch (THL)2.1654Threading length - millimeter (THL)55Tolerance limitD11Usable length (ULDR)2.5
Specifications
| Basic Standard | DIN 376 |
| Clamping Length - millimeter (LSC) | 35 |
| Clamping width - inch | 1.2598 |
| Clamping width - millimeter (WSC) | 32 |
| Coating | Steam Tempered |
| Connection diameter - inch (DCON MS) | 40 |
| Connection diameter - millimeter (DCON MS) | 32 |
| EDP number | 137215 |
| Flute count (NOF) | 5 |
| Flute Geometry (FDC) | Spiral Flute Geometry |
| Flute helix angle (FHA) | 45 |
| Hand (Cutting direction) | Right |
| Material | HSS-E-PM |
| Material application | P - Steel and cast steel |
| MID number | 5973550 |
| Ordering code ANSI | EX01M56 |
| Overall length - inch (OAL) | 9.8425 |
| Overall length - millimeter (OAL) | 250 |
| Premachined hole diameter - inch (PHD) | 1.9882 |
| Premachined hole diameter - millimeter (PHD) | 45 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | C 2 - 3 |
| Thread diameter - millimeter (TD) | 50.5 |
| Thread diameter size (TDZ) | 56 |
| Thread form (THFT) | M - Metric coarse |
| Thread pitch - inch (TP) | 0.2165 |
| Thread pitch - millimeter (TP) | 5.5 |
| Threading length - inch (THL) | 2.1654 |
| Threading length - millimeter (THL) | 55 |
| Tolerance limit | D11 |
| Usable length (ULDR) | 2.5 |
5973550