Pramet SPKN 42EDSR:8215 6753420 Milling Insert - Face
- Write a review
$10.60
ChipbreakerNo chipbreakerCoating8215Coating processPVDCoating property (CTP)1Cooling effectSlightly negative effect on tool lifeCutting edge length - inch (L)0.5Cutting edge length - millimeter (L)12.7Depth of cut maximum - inch (APMX)0.354Depth of cut maximum - millimeter (APMX)9Depth of cut minimum - inch (APMN)0.039Depth of cut minimum - millimeter (APMN)1Feed maximal - millimeter0.3Feed minimal - millimeter0.15Feed_MAX_IMP_NUM0.012Feed_MIN_IMP_NUM0.006Inscribed circle diameter - inch (IC)0.5Inscribed circle diameter - millimeter (IC)12.7Insert thickness - inch (S)0.125Insert thickness - millimeter (S)3.18m-dimension - inch (M)0.035m-dimension - millimeter (M)0.88Wiper edge length - millimeter (BS)1.6
Specifications
| Chipbreaker | No chipbreaker |
| Coating | 8215 |
| Coating process | PVD |
| Coating property (CTP) | 1 |
| Cooling effect | Slightly negative effect on tool life |
| Cutting edge length - inch (L) | 0.5 |
| Cutting edge length - millimeter (L) | 12.7 |
| Depth of cut maximum - inch (APMX) | 0.354 |
| Depth of cut maximum - millimeter (APMX) | 9 |
| Depth of cut minimum - inch (APMN) | 0.039 |
| Depth of cut minimum - millimeter (APMN) | 1 |
| Feed maximal - millimeter | 0.3 |
| Feed minimal - millimeter | 0.15 |
| Feed_MAX_IMP_NUM | 0.012 |
| Feed_MIN_IMP_NUM | 0.006 |
| Inscribed circle diameter - inch (IC) | 0.5 |
| Inscribed circle diameter - millimeter (IC) | 12.7 |
| Insert thickness - inch (S) | 0.125 |
| Insert thickness - millimeter (S) | 3.18 |
| m-dimension - inch (M) | 0.035 |
| m-dimension - millimeter (M) | 0.88 |
| Wiper edge length - millimeter (BS) | 1.6 |
SPKN 42EDSR:8215
