Dormer E013M12X1.0 5973516 Machine Tap Spiral Flute 45° 3FL M12 x 1.00 mm
- Write a review
$75.47
Basic StandardISO 529Clamping Length - millimeter (LSC)10Clamping width - inch0.2795Clamping width - millimeter (WSC)7.1CoatingSteam TemperedConnection diameter - inch (DCON MS)9Connection diameter - millimeter (DCON MS)7.1EDP number568873Flute count (NOF)3Flute Geometry (FDC)Spiral Flute GeometryFlute helix angle (FHA)45Hand (Cutting direction)RightMaterialHSS-E-PMMaterial applicationP - Steel and cast steelMID number5973516Ordering code ANSIE013M12X1.0Overall length - inch (OAL)3.5039Overall length - millimeter (OAL)89Premachined hole diameter - inch (PHD)0.4331Premachined hole diameter - millimeter (PHD)45ShankCylindrical shank with SquareTap chamfer style (TCS)C 2 - 3Thread diameter - millimeter (TD)11Thread diameter size (TDZ)12Thread form (THFT)MF - Metric fineThread pitch - inch (TP)0.0394Thread pitch - millimeter (TP)1Threading length - inch (THL)0.6299Threading length - millimeter (THL)16Tolerance limitD6Usable length (ULDR)2.5
Specifications
| Basic Standard | ISO 529 |
| Clamping Length - millimeter (LSC) | 10 |
| Clamping width - inch | 0.2795 |
| Clamping width - millimeter (WSC) | 7.1 |
| Coating | Steam Tempered |
| Connection diameter - inch (DCON MS) | 9 |
| Connection diameter - millimeter (DCON MS) | 7.1 |
| EDP number | 568873 |
| Flute count (NOF) | 3 |
| Flute Geometry (FDC) | Spiral Flute Geometry |
| Flute helix angle (FHA) | 45 |
| Hand (Cutting direction) | Right |
| Material | HSS-E-PM |
| Material application | P - Steel and cast steel |
| MID number | 5973516 |
| Ordering code ANSI | E013M12X1.0 |
| Overall length - inch (OAL) | 3.5039 |
| Overall length - millimeter (OAL) | 89 |
| Premachined hole diameter - inch (PHD) | 0.4331 |
| Premachined hole diameter - millimeter (PHD) | 45 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | C 2 - 3 |
| Thread diameter - millimeter (TD) | 11 |
| Thread diameter size (TDZ) | 12 |
| Thread form (THFT) | MF - Metric fine |
| Thread pitch - inch (TP) | 0.0394 |
| Thread pitch - millimeter (TP) | 1 |
| Threading length - inch (THL) | 0.6299 |
| Threading length - millimeter (THL) | 16 |
| Tolerance limit | D6 |
| Usable length (ULDR) | 2.5 |
5973516
