Dormer S6628.0XR1.0 8030321 Corner Radius End Mill
- Write a review
$62.87
Basic StandardDORMERCoatingBrightConnection diameter - inch (DCON MS)0.315Connection diameter - millimeter (DCON MS)8Corner radius - inch (RE)0.0394Corner radius - millimeter (RE)1Cut lengthShortCutting diameter - inch (DC)0.315Cutting diameter - millimeter (DC)8Cutting diameter tolerance class (TCDC)h9Depth of cut maximum - inch (APMX)0.7874Depth of cut maximum - millimeter (APMX)20EDP number8030321Flute count (NOF)4Flute helix angle (FHA)40Material applicationN - Non-ferrous metalsMaterial code (BMC)HMMID number8030321Mill ProfileW - Non-ferrous Cutter Type for Soft Malleable MaterialsOrdering code ANSIS6628.0XR1.0Overall length - inch (OAL)2.5197Overall length - millimeter (OAL)64Radial rake angle (GAMF)10ShankCylindrical shank DIN 6535 HA
Specifications
| Basic Standard | DORMER |
| Coating | Bright |
| Connection diameter - inch (DCON MS) | 0.315 |
| Connection diameter - millimeter (DCON MS) | 8 |
| Corner radius - inch (RE) | 0.0394 |
| Corner radius - millimeter (RE) | 1 |
| Cut length | Short |
| Cutting diameter - inch (DC) | 0.315 |
| Cutting diameter - millimeter (DC) | 8 |
| Cutting diameter tolerance class (TCDC) | h9 |
| Depth of cut maximum - inch (APMX) | 0.7874 |
| Depth of cut maximum - millimeter (APMX) | 20 |
| EDP number | 8030321 |
| Flute count (NOF) | 4 |
| Flute helix angle (FHA) | 40 |
| Material application | N - Non-ferrous metals |
| Material code (BMC) | HM |
| MID number | 8030321 |
| Mill Profile | W - Non-ferrous Cutter Type for Soft Malleable Materials |
| Ordering code ANSI | S6628.0XR1.0 |
| Overall length - inch (OAL) | 2.5197 |
| Overall length - millimeter (OAL) | 64 |
| Radial rake angle (GAMF) | 10 |
| Shank | Cylindrical shank DIN 6535 HA |
8030321
