Dormer E102M12NO8 5974819 M Hand Tap Straight Flute DIN 352 4FL M12 x 1.75 mm
- Write a review
$115.18
Basic StandardDIN 352Clamping width - inch0.2756Clamping width - millimeter (WSC)9CoatingSteam TemperedCoating property (CTP)4Connection diameter - inch (DCON MS)0.3543Connection diameter - millimeter (DCON MS)75Coolant supply property (CSP)7EDP number80078Flute count (NOF)10.3Flute Geometry (FDC)Straight Flute GeometryHand (Cutting direction)RightMaterialHSS-EMaterial applicationK - Cast iron, M - Stainless steel, P - Steel and cast steelMID number5974819Ordering code ANSIE102M12NO8Overall length - inch (OAL)2.9528Overall length - millimeter (OAL)75Premachined hole diameter - inch (PHD)0.4055Premachined hole diameter - millimeter (PHD)10.3ShankCylindrical shank with SquareTap chamfer style (TCS)A 6 - 8 / B 3.5 - 5 / C 2 - 3Thread diameter size (TDZ)12Thread form (THFT)M - Metric coarseThread pitch - inch (TP)0.0689Thread pitch - millimeter (TP)1.75Threading length - inch (THL)0.9843Threading length - millimeter (THL)25Usable length (ULDR)1.5
Specifications
| Basic Standard | DIN 352 |
| Clamping width - inch | 0.2756 |
| Clamping width - millimeter (WSC) | 9 |
| Coating | Steam Tempered |
| Coating property (CTP) | 4 |
| Connection diameter - inch (DCON MS) | 0.3543 |
| Connection diameter - millimeter (DCON MS) | 75 |
| Coolant supply property (CSP) | 7 |
| EDP number | 80078 |
| Flute count (NOF) | 10.3 |
| Flute Geometry (FDC) | Straight Flute Geometry |
| Hand (Cutting direction) | Right |
| Material | HSS-E |
| Material application | K - Cast iron, M - Stainless steel, P - Steel and cast steel |
| MID number | 5974819 |
| Ordering code ANSI | E102M12NO8 |
| Overall length - inch (OAL) | 2.9528 |
| Overall length - millimeter (OAL) | 75 |
| Premachined hole diameter - inch (PHD) | 0.4055 |
| Premachined hole diameter - millimeter (PHD) | 10.3 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | A 6 - 8 / B 3.5 - 5 / C 2 - 3 |
| Thread diameter size (TDZ) | 12 |
| Thread form (THFT) | M - Metric coarse |
| Thread pitch - inch (TP) | 0.0689 |
| Thread pitch - millimeter (TP) | 1.75 |
| Threading length - inch (THL) | 0.9843 |
| Threading length - millimeter (THL) | 25 |
| Usable length (ULDR) | 1.5 |
5974819