Pramet LNUX 50-1275000:6630 6752126 Turning Insert - Heavy Duty And Railway
- Write a review
$109.06
ChipbreakerWith chipbreaker -no designationCoating6630Coating processMT-CVDCoating property (CTP)1Cooling effectVery positive effect on tool life - cooling is recommendedCorner radius - inch (RE)0.126Corner radius - millimeter (RE)3.2Cutting edge length - inch (L)2Cutting edge length - millimeter (L)50.8Depth of cut maximum - inch (APMX)1.417Depth of cut maximum - millimeter (APMX)36Depth of cut minimum - inch (APMN)0.394Depth of cut minimum - millimeter (APMN)10Feed maximal - millimeter2.5Feed minimal - millimeter1.2Feed_MAX_IMP_NUM0.098Feed_MIN_IMP_NUM0.047Fixing hole diameter - inch (D1)0.366Fixing hole diameter - millimeter (D1)9.3Insert shape code (SC)L - rectangularInsert thickness - inch (S)0.551Insert thickness - millimeter (S)14Insert width - inch (W1)1Insert width - millimeter (W1)25.4
Specifications
| Chipbreaker | With chipbreaker -no designation |
| Coating | 6630 |
| Coating process | MT-CVD |
| Coating property (CTP) | 1 |
| Cooling effect | Very positive effect on tool life - cooling is recommended |
| Corner radius - inch (RE) | 0.126 |
| Corner radius - millimeter (RE) | 3.2 |
| Cutting edge length - inch (L) | 2 |
| Cutting edge length - millimeter (L) | 50.8 |
| Depth of cut maximum - inch (APMX) | 1.417 |
| Depth of cut maximum - millimeter (APMX) | 36 |
| Depth of cut minimum - inch (APMN) | 0.394 |
| Depth of cut minimum - millimeter (APMN) | 10 |
| Feed maximal - millimeter | 2.5 |
| Feed minimal - millimeter | 1.2 |
| Feed_MAX_IMP_NUM | 0.098 |
| Feed_MIN_IMP_NUM | 0.047 |
| Fixing hole diameter - inch (D1) | 0.366 |
| Fixing hole diameter - millimeter (D1) | 9.3 |
| Insert shape code (SC) | L - rectangular |
| Insert thickness - inch (S) | 0.551 |
| Insert thickness - millimeter (S) | 14 |
| Insert width - inch (W1) | 1 |
| Insert width - millimeter (W1) | 25.4 |
6752126