Dormer EP11M10X1.0 5973663 Machine Tap Spiral Point 3FL M10 x 1.00 mm
- Write a review
$34.71
Basic StandardDIN 374Clamping Length - millimeter (LSC)8Clamping width - fractional inch (WSC)5.5Clamping width - inch0.2165CoatingSteam TemperedConnection diameter - inch (DCON MS)7EDP number137703Flute count (NOF)3Flute Geometry (FDC)Spiral Point GeometryHand (Cutting direction)RightMaterialHSS-E-PMMaterial applicationP - Steel and cast steelMID number5973663Ordering code ANSIEP11M10X1.0Overall length - inch (OAL)3.5433Overall length - millimeter (OAL)90Premachined hole diameter - inch (PHD)0.3543Premachined hole diameter - millimeter (PHD)9ShankCylindrical shank with SquareTap chamfer style (TCS)B 3.5 - 5Thread diameter size (TDZ)10Thread form (THFT)MF - Metric fineThread pitch - inch (TP)0.0394Thread pitch - millimeter (TP)1Threading length - inch (THL)0.7087Threading length - millimeter (THL)18Tolerance limitD6Usable length (ULDR)2.5
Specifications
| Basic Standard | DIN 374 |
| Clamping Length - millimeter (LSC) | 8 |
| Clamping width - fractional inch (WSC) | 5.5 |
| Clamping width - inch | 0.2165 |
| Coating | Steam Tempered |
| Connection diameter - inch (DCON MS) | 7 |
| EDP number | 137703 |
| Flute count (NOF) | 3 |
| Flute Geometry (FDC) | Spiral Point Geometry |
| Hand (Cutting direction) | Right |
| Material | HSS-E-PM |
| Material application | P - Steel and cast steel |
| MID number | 5973663 |
| Ordering code ANSI | EP11M10X1.0 |
| Overall length - inch (OAL) | 3.5433 |
| Overall length - millimeter (OAL) | 90 |
| Premachined hole diameter - inch (PHD) | 0.3543 |
| Premachined hole diameter - millimeter (PHD) | 9 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | B 3.5 - 5 |
| Thread diameter size (TDZ) | 10 |
| Thread form (THFT) | MF - Metric fine |
| Thread pitch - inch (TP) | 0.0394 |
| Thread pitch - millimeter (TP) | 1 |
| Threading length - inch (THL) | 0.7087 |
| Threading length - millimeter (THL) | 18 |
| Tolerance limit | D6 |
| Usable length (ULDR) | 2.5 |
5973663
