Dormer C30532.0 5984383 Slot Drill 32.00 mm
- Write a review
$233.88
Basic StandardDIN 844 KCoatingBrightConnection diameter - inch (DCON MS)1.2598Connection diameter - millimeter (DCON MS)32Connection diameter tolerance machine side (TCDCONMS)h6Cut lengthShortCutting diameter - inch (DC)1.2598Cutting diameter - millimeter (DC)32Cutting diameter tolerance class (TCDC)e8Depth of cut maximum - inch (APMX)2.0866Depth of cut maximum - millimeter (APMX)53EDP number572412Flute count (NOF)3Flute helix angle (FHA)30MaterialHSS-E-PMMaterial applicationN - Non-ferrous metals, P - Steel and cast steel, S - High-temperature alloysMID number5984383Mill ProfileN - General Purpose Cutter Type for Low to High Resistance MaterialsOrdering code ANSIC30532.0Overall length - inch (OAL)5.2362Overall length - millimeter (OAL)133Peripheral effective cutting edge count (ZEFP)3Radial rake angle (GAMF)12ShankWeldon shank DIN 1835B
Specifications
| Basic Standard | DIN 844 K |
| Coating | Bright |
| Connection diameter - inch (DCON MS) | 1.2598 |
| Connection diameter - millimeter (DCON MS) | 32 |
| Connection diameter tolerance machine side (TCDCONMS) | h6 |
| Cut length | Short |
| Cutting diameter - inch (DC) | 1.2598 |
| Cutting diameter - millimeter (DC) | 32 |
| Cutting diameter tolerance class (TCDC) | e8 |
| Depth of cut maximum - inch (APMX) | 2.0866 |
| Depth of cut maximum - millimeter (APMX) | 53 |
| EDP number | 572412 |
| Flute count (NOF) | 3 |
| Flute helix angle (FHA) | 30 |
| Material | HSS-E-PM |
| Material application | N - Non-ferrous metals, P - Steel and cast steel, S - High-temperature alloys |
| MID number | 5984383 |
| Mill Profile | N - General Purpose Cutter Type for Low to High Resistance Materials |
| Ordering code ANSI | C30532.0 |
| Overall length - inch (OAL) | 5.2362 |
| Overall length - millimeter (OAL) | 133 |
| Peripheral effective cutting edge count (ZEFP) | 3 |
| Radial rake angle (GAMF) | 12 |
| Shank | Weldon shank DIN 1835B |
5984383
