Dormer A0029/32 5967293 118° Split Point Tipped Jobber Drill 9/32 inch
- Write a review
$4.49
ApplicationAngleIcon_DICT_SELDrill point 118°Basic StandardDIN 338CoatingBright/TiNCoating processPVDCoating property (CTP)1Connection (shank) descriptionCylindrical shankConnection diameter - inch (DCON MS)0.2811Connection diameter - millimeter (DCON MS)7.14Cutting diameter - fractional inch (DC)9/32Cutting diameter - inch (DC)0.2813Cutting diameter - millimeter (DC)7.14Cutting diameter tolerance class (TCDC)h8Drill LengthJobberEDP number351093Hand (Cutting direction)RightLength chip flute - inch (LCF)2.7165Length chip flute - millimeter (LCF)69MaterialHSSMaterial applicationK - Cast iron, N - Non-ferrous metals, P - Steel and cast steelMID number5967293Ordering code ANSIA0029/32Overall length - inch (OAL)4.2913Overall length - millimeter (OAL)109Point Angle (SIG)118Spiral formStandard SpiralSurface treatementTiN TippedUsable length (ULDR)4
Specifications
| ApplicationAngleIcon_DICT_SEL | Drill point 118° |
| Basic Standard | DIN 338 |
| Coating | Bright/TiN |
| Coating process | PVD |
| Coating property (CTP) | 1 |
| Connection (shank) description | Cylindrical shank |
| Connection diameter - inch (DCON MS) | 0.2811 |
| Connection diameter - millimeter (DCON MS) | 7.14 |
| Cutting diameter - fractional inch (DC) | 9/32 |
| Cutting diameter - inch (DC) | 0.2813 |
| Cutting diameter - millimeter (DC) | 7.14 |
| Cutting diameter tolerance class (TCDC) | h8 |
| Drill Length | Jobber |
| EDP number | 351093 |
| Hand (Cutting direction) | Right |
| Length chip flute - inch (LCF) | 2.7165 |
| Length chip flute - millimeter (LCF) | 69 |
| Material | HSS |
| Material application | K - Cast iron, N - Non-ferrous metals, P - Steel and cast steel |
| MID number | 5967293 |
| Ordering code ANSI | A0029/32 |
| Overall length - inch (OAL) | 4.2913 |
| Overall length - millimeter (OAL) | 109 |
| Point Angle (SIG) | 118 |
| Spiral form | Standard Spiral |
| Surface treatement | TiN Tipped |
| Usable length (ULDR) | 4 |
5967293
