Dormer S2392.0 7648878 Ball-Nosed End Mill 2.00 mm
- Write a review
$18.81
Basic StandardDORMERCoatingTiAlNCoating property (CTP)1Connection diameter - inch (DCON MS)0.1181Connection diameter - millimeter (DCON MS)3Corner radius - inch (RE)0.039Corner radius - millimeter (RE)1Cut lengthMediumCutting diameter - inch (DC)0.0787Cutting diameter - millimeter (DC)2Cutting diameter tolerance class (TCDC)ANSI +.000/-.002Depth of cut maximum - inch (APMX)0.2362Depth of cut maximum - millimeter (APMX)6EDP number7648878Flute count (NOF)4Flute helix angle (FHA)30MaterialHMMaterial applicationK - Cast iron, M - Stainless steel, P - Steel and cast steelMID number7648878Mill ProfileN - General Purpose Cutter Type for Low to High Resistance MaterialsOrdering code ANSIS2392.0Overall length - inch (OAL)1.4961Overall length - millimeter (OAL)38Peripheral effective cutting edge count (ZEFP)4Radial rake angle (GAMF)10ShankCylindrical shank
Specifications
| Basic Standard | DORMER |
| Coating | TiAlN |
| Coating property (CTP) | 1 |
| Connection diameter - inch (DCON MS) | 0.1181 |
| Connection diameter - millimeter (DCON MS) | 3 |
| Corner radius - inch (RE) | 0.039 |
| Corner radius - millimeter (RE) | 1 |
| Cut length | Medium |
| Cutting diameter - inch (DC) | 0.0787 |
| Cutting diameter - millimeter (DC) | 2 |
| Cutting diameter tolerance class (TCDC) | ANSI +.000/-.002 |
| Depth of cut maximum - inch (APMX) | 0.2362 |
| Depth of cut maximum - millimeter (APMX) | 6 |
| EDP number | 7648878 |
| Flute count (NOF) | 4 |
| Flute helix angle (FHA) | 30 |
| Material | HM |
| Material application | K - Cast iron, M - Stainless steel, P - Steel and cast steel |
| MID number | 7648878 |
| Mill Profile | N - General Purpose Cutter Type for Low to High Resistance Materials |
| Ordering code ANSI | S2392.0 |
| Overall length - inch (OAL) | 1.4961 |
| Overall length - millimeter (OAL) | 38 |
| Peripheral effective cutting edge count (ZEFP) | 4 |
| Radial rake angle (GAMF) | 10 |
| Shank | Cylindrical shank |
7648878
