Dormer E9085/8 7350529 Machine Tap Yellow Shark for Low Alloy Steels Spiral Flute 4FL 5/8 inch x 18
- Write a review
$85.99
Basic StandardDIN/ANSIClamping width - inch0.358CoatingTiAlN/TopCoating property (CTP)1Connection diameter - inch (DCON MS)0.48Connection diameter - millimeter (DCON MS)12.19Coolant supply property (CSP)37/64EDP number7350529Flute count (NOF)4Flute Geometry (FDC)Spiral Flute GeometryFlute helix angle (FHA)40Hand (Cutting direction)RightMaterialHSS-E-PMMaterial applicationN - Non-ferrous metals, P - Steel and cast steelMID number7350529Ordering code ANSIE9085/8Overall length - inch (OAL)3.937Overall length - millimeter (OAL)0.48Premachined hole diameter - imperial (PHD)37/64Premachined hole diameter - inch (PHD)0.5709Premachined hole diameter - millimeter (PHD)40ShankCylindrical shank with SquareTap chamfer style (TCS)C 2 - 3Thread diameter - millimeter (TD)14.5Thread diameter size (TDZ)5/8Thread form (THFT)UNF - Unified FineThreading length - inch (THL)0.591Threads per inch (TPI)18Tolerance limitH5Usable length (ULDR)2
Specifications
| Basic Standard | DIN/ANSI |
| Clamping width - inch | 0.358 |
| Coating | TiAlN/Top |
| Coating property (CTP) | 1 |
| Connection diameter - inch (DCON MS) | 0.48 |
| Connection diameter - millimeter (DCON MS) | 12.19 |
| Coolant supply property (CSP) | 37/64 |
| EDP number | 7350529 |
| Flute count (NOF) | 4 |
| Flute Geometry (FDC) | Spiral Flute Geometry |
| Flute helix angle (FHA) | 40 |
| Hand (Cutting direction) | Right |
| Material | HSS-E-PM |
| Material application | N - Non-ferrous metals, P - Steel and cast steel |
| MID number | 7350529 |
| Ordering code ANSI | E9085/8 |
| Overall length - inch (OAL) | 3.937 |
| Overall length - millimeter (OAL) | 0.48 |
| Premachined hole diameter - imperial (PHD) | 37/64 |
| Premachined hole diameter - inch (PHD) | 0.5709 |
| Premachined hole diameter - millimeter (PHD) | 40 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | C 2 - 3 |
| Thread diameter - millimeter (TD) | 14.5 |
| Thread diameter size (TDZ) | 5/8 |
| Thread form (THFT) | UNF - Unified Fine |
| Threading length - inch (THL) | 0.591 |
| Threads per inch (TPI) | 18 |
| Tolerance limit | H5 |
| Usable length (ULDR) | 2 |
7350529