Dormer C35214.0 5983974 Slot Drill 14.00 mm
- Write a review
$85.40
Basic StandardDIN 844 KCoatingALCRONACoating property (CTP)1Connection diameter - inch (DCON MS)0.4724Connection diameter - millimeter (DCON MS)12Connection diameter tolerance machine side (TCDCONMS)h6Cut lengthShortCutting diameter - inch (DC)0.5512Cutting diameter - millimeter (DC)14Cutting diameter tolerance class (TCDC)e8Depth of cut maximum - inch (APMX)1.0236Depth of cut maximum - millimeter (APMX)26EDP number572986Flute count (NOF)3Flute helix angle (FHA)30MaterialHSS-E-PMMaterial applicationK - Cast iron, N - Non-ferrous metals, P - Steel and cast steel, S - High-temperature alloysMID number5983974Mill ProfileN - General Purpose Cutter Type for Low to High Resistance MaterialsNeck diameter - inch (DN)0.4528Neck diameter - millimeter (DN)11.5Ordering code ANSIC35214.0Overall length - inch (OAL)3.2677Overall length - millimeter (OAL)83Peripheral effective cutting edge count (ZEFP)3Radial rake angle (GAMF)12ShankWeldon shank DIN 1835BUsable Length - millimeter (LU)37.5
Specifications
| Basic Standard | DIN 844 K |
| Coating | ALCRONA |
| Coating property (CTP) | 1 |
| Connection diameter - inch (DCON MS) | 0.4724 |
| Connection diameter - millimeter (DCON MS) | 12 |
| Connection diameter tolerance machine side (TCDCONMS) | h6 |
| Cut length | Short |
| Cutting diameter - inch (DC) | 0.5512 |
| Cutting diameter - millimeter (DC) | 14 |
| Cutting diameter tolerance class (TCDC) | e8 |
| Depth of cut maximum - inch (APMX) | 1.0236 |
| Depth of cut maximum - millimeter (APMX) | 26 |
| EDP number | 572986 |
| Flute count (NOF) | 3 |
| Flute helix angle (FHA) | 30 |
| Material | HSS-E-PM |
| Material application | K - Cast iron, N - Non-ferrous metals, P - Steel and cast steel, S - High-temperature alloys |
| MID number | 5983974 |
| Mill Profile | N - General Purpose Cutter Type for Low to High Resistance Materials |
| Neck diameter - inch (DN) | 0.4528 |
| Neck diameter - millimeter (DN) | 11.5 |
| Ordering code ANSI | C35214.0 |
| Overall length - inch (OAL) | 3.2677 |
| Overall length - millimeter (OAL) | 83 |
| Peripheral effective cutting edge count (ZEFP) | 3 |
| Radial rake angle (GAMF) | 12 |
| Shank | Weldon shank DIN 1835B |
| Usable Length - millimeter (LU) | 37.5 |
5983974
