Dormer S92214.0 5982954 End Mill 14.00 mm
- Write a review
$121.60
Basic StandardDORMERCoatingTiAlNCoating property (CTP)1Connection diameter - inch (DCON MS)0.5512Connection diameter - millimeter (DCON MS)14Corner chamfer width - millimeter (CHW)0.2Cut lengthMediumCutting diameter - inch (DC)0.5512Cutting diameter - millimeter (DC)14Cutting diameter tolerance class (TCDC)h10Depth of cut maximum - inch (APMX)1.1811Depth of cut maximum - millimeter (APMX)30EDP number40027Flute count (NOF)2Flute helix angle (FHA)30MaterialHMMaterial applicationK - Cast iron, N - Non-ferrous metals, P - Steel and cast steel, S - High-temperature alloysMID number5982954Mill ProfileN - General Purpose Cutter Type for Low to High Resistance MaterialsOrdering code ANSIS92214.0Overall length - inch (OAL)3.2677Overall length - millimeter (OAL)83Peripheral effective cutting edge count (ZEFP)2Radial rake angle (GAMF)12ShankCylindrical shank DIN 6535 HB
Specifications
| Basic Standard | DORMER |
| Coating | TiAlN |
| Coating property (CTP) | 1 |
| Connection diameter - inch (DCON MS) | 0.5512 |
| Connection diameter - millimeter (DCON MS) | 14 |
| Corner chamfer width - millimeter (CHW) | 0.2 |
| Cut length | Medium |
| Cutting diameter - inch (DC) | 0.5512 |
| Cutting diameter - millimeter (DC) | 14 |
| Cutting diameter tolerance class (TCDC) | h10 |
| Depth of cut maximum - inch (APMX) | 1.1811 |
| Depth of cut maximum - millimeter (APMX) | 30 |
| EDP number | 40027 |
| Flute count (NOF) | 2 |
| Flute helix angle (FHA) | 30 |
| Material | HM |
| Material application | K - Cast iron, N - Non-ferrous metals, P - Steel and cast steel, S - High-temperature alloys |
| MID number | 5982954 |
| Mill Profile | N - General Purpose Cutter Type for Low to High Resistance Materials |
| Ordering code ANSI | S92214.0 |
| Overall length - inch (OAL) | 3.2677 |
| Overall length - millimeter (OAL) | 83 |
| Peripheral effective cutting edge count (ZEFP) | 2 |
| Radial rake angle (GAMF) | 12 |
| Shank | Cylindrical shank DIN 6535 HB |
5982954
