Dormer A5535.5 5971554 130° ADX Drill Oil Feed 5.50 mm
- Write a review
$110.75
ApplicationAngleIcon_DICT_SELDrill point 130°Basic StandardDORMERCoatingTiAlN/TopCoating processPVDCoating property (CTP)1Connection (shank) descriptionCylindrical shank DIN 6535 HAConnection diameter - inch (DCON MS)0.2362Connection diameter - millimeter (DCON MS)6Connection diameter tolerance machine side (TCDCONMS)h6Coolant supply property (CSP)1Cutting diameter - inch (DC)0.2165Cutting diameter - millimeter (DC)5.5Cutting diameter tolerance class (TCDC)h8Drill LengthJobberEDP number391242Hand (Cutting direction)RightLength chip flute - inch (LCF)1.5748Length chip flute - millimeter (LCF)40MaterialHSS-EMID number5971554Ordering code ANSIA5535.5Overall length - inch (OAL)3.1102Overall length - millimeter (OAL)79Point Angle (SIG)130Shank length - millimeter (LS)36Spiral formQuick SpiralUsable length (ULDR)5
Specifications
| ApplicationAngleIcon_DICT_SEL | Drill point 130° |
| Basic Standard | DORMER |
| Coating | TiAlN/Top |
| Coating process | PVD |
| Coating property (CTP) | 1 |
| Connection (shank) description | Cylindrical shank DIN 6535 HA |
| Connection diameter - inch (DCON MS) | 0.2362 |
| Connection diameter - millimeter (DCON MS) | 6 |
| Connection diameter tolerance machine side (TCDCONMS) | h6 |
| Coolant supply property (CSP) | 1 |
| Cutting diameter - inch (DC) | 0.2165 |
| Cutting diameter - millimeter (DC) | 5.5 |
| Cutting diameter tolerance class (TCDC) | h8 |
| Drill Length | Jobber |
| EDP number | 391242 |
| Hand (Cutting direction) | Right |
| Length chip flute - inch (LCF) | 1.5748 |
| Length chip flute - millimeter (LCF) | 40 |
| Material | HSS-E |
| MID number | 5971554 |
| Ordering code ANSI | A5535.5 |
| Overall length - inch (OAL) | 3.1102 |
| Overall length - millimeter (OAL) | 79 |
| Point Angle (SIG) | 130 |
| Shank length - millimeter (LS) | 36 |
| Spiral form | Quick Spiral |
| Usable length (ULDR) | 5 |
5971554
