Dormer C29532.0 5983854 End Mill N 844 L 32.00 mm
- Write a review
$359.47
Basic StandardDIN 844 LCoatingTiCNCoating property (CTP)1Connection diameter - inch (DCON MS)1.2598Connection diameter - millimeter (DCON MS)32Cut lengthLongCutting diameter - inch (DC)1.2598Cutting diameter - millimeter (DC)32Cutting diameter tolerance class (TCDC)k10Depth of cut maximum - inch (APMX)4.1732Depth of cut maximum - millimeter (APMX)106EDP number356319Flute count (NOF)6Flute helix angle (FHA)30MaterialHSS-E-PMMaterial applicationK - Cast iron, N - Non-ferrous metals, P - Steel and cast steel, S - High-temperature alloysMID number5983854Mill ProfileN - General Purpose Cutter Type for Low to High Resistance MaterialsNeck diameter - inch (DN)1.2402Neck diameter - millimeter (DN)31.5Ordering code ANSIC29532.0Overall length - inch (OAL)7.3228Overall length - millimeter (OAL)186Peripheral effective cutting edge count (ZEFP)6Radial rake angle (GAMF)12ShankWeldon shank DIN 1835BUsable Length - millimeter (LU)125.5
Specifications
| Basic Standard | DIN 844 L |
| Coating | TiCN |
| Coating property (CTP) | 1 |
| Connection diameter - inch (DCON MS) | 1.2598 |
| Connection diameter - millimeter (DCON MS) | 32 |
| Cut length | Long |
| Cutting diameter - inch (DC) | 1.2598 |
| Cutting diameter - millimeter (DC) | 32 |
| Cutting diameter tolerance class (TCDC) | k10 |
| Depth of cut maximum - inch (APMX) | 4.1732 |
| Depth of cut maximum - millimeter (APMX) | 106 |
| EDP number | 356319 |
| Flute count (NOF) | 6 |
| Flute helix angle (FHA) | 30 |
| Material | HSS-E-PM |
| Material application | K - Cast iron, N - Non-ferrous metals, P - Steel and cast steel, S - High-temperature alloys |
| MID number | 5983854 |
| Mill Profile | N - General Purpose Cutter Type for Low to High Resistance Materials |
| Neck diameter - inch (DN) | 1.2402 |
| Neck diameter - millimeter (DN) | 31.5 |
| Ordering code ANSI | C29532.0 |
| Overall length - inch (OAL) | 7.3228 |
| Overall length - millimeter (OAL) | 186 |
| Peripheral effective cutting edge count (ZEFP) | 6 |
| Radial rake angle (GAMF) | 12 |
| Shank | Weldon shank DIN 1835B |
| Usable Length - millimeter (LU) | 125.5 |
5983854
