Dormer E605M6 5977985 Machine Tap Extra Long Spiral Flute 40° 3FL M6 x 1.00 mm
- Write a review
$71.24
Basic StandardISO 2283Clamping Length - millimeter (LSC)8Clamping width - inch0.1969Clamping width - millimeter (WSC)5CoatingBrightConnection diameter - inch (DCON MS)0.248Connection diameter - millimeter (DCON MS)6.3EDP number123874Flute count (NOF)3Flute Geometry (FDC)Spiral Flute GeometryFlute helix angle (FHA)40Hand (Cutting direction)RightMaterialHSS-E-PMMaterial applicationP - Steel and cast steelMID number5977985Ordering code ANSIE605M6Overall length - inch (OAL)3.5039Overall length - millimeter (OAL)89Premachined hole diameter - inch (PHD)0.1969Premachined hole diameter - millimeter (PHD)5ShankCylindrical shank with SquareTap chamfer style (TCS)C 2 - 3Thread diameter size (TDZ)6Thread form (THFT)M - Metric coarseThread pitch - inch (TP)0.0394Thread pitch - millimeter (TP)1Threading length - inch (THL)0.4724Threading length - millimeter (THL)12Usable length (ULDR)2Usable Length - inch (LU)1.1417Usable Length - millimeter (LU)29
Specifications
| Basic Standard | ISO 2283 |
| Clamping Length - millimeter (LSC) | 8 |
| Clamping width - inch | 0.1969 |
| Clamping width - millimeter (WSC) | 5 |
| Coating | Bright |
| Connection diameter - inch (DCON MS) | 0.248 |
| Connection diameter - millimeter (DCON MS) | 6.3 |
| EDP number | 123874 |
| Flute count (NOF) | 3 |
| Flute Geometry (FDC) | Spiral Flute Geometry |
| Flute helix angle (FHA) | 40 |
| Hand (Cutting direction) | Right |
| Material | HSS-E-PM |
| Material application | P - Steel and cast steel |
| MID number | 5977985 |
| Ordering code ANSI | E605M6 |
| Overall length - inch (OAL) | 3.5039 |
| Overall length - millimeter (OAL) | 89 |
| Premachined hole diameter - inch (PHD) | 0.1969 |
| Premachined hole diameter - millimeter (PHD) | 5 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | C 2 - 3 |
| Thread diameter size (TDZ) | 6 |
| Thread form (THFT) | M - Metric coarse |
| Thread pitch - inch (TP) | 0.0394 |
| Thread pitch - millimeter (TP) | 1 |
| Threading length - inch (THL) | 0.4724 |
| Threading length - millimeter (THL) | 12 |
| Usable length (ULDR) | 2 |
| Usable Length - inch (LU) | 1.1417 |
| Usable Length - millimeter (LU) | 29 |
5977985
