Dormer C11032.0 5983908 Slot Drill 32.00 mm
- Write a review
$173.04
Basic StandardDIN 327 DCoatingBrightConnection diameter - inch (DCON MS)1.2598Connection diameter - millimeter (DCON MS)32Connection diameter tolerance machine side (TCDCONMS)h6Cut lengthExtra shortCutting diameter - inch (DC)1.2598Cutting diameter - millimeter (DC)32Cutting diameter tolerance class (TCDC)e8Depth of cut maximum - inch (APMX)1.2598Depth of cut maximum - millimeter (APMX)32EDP number353417Flute count (NOF)2Flute helix angle (FHA)30MaterialHSS-E-PMMaterial applicationN - Non-ferrous metals, P - Steel and cast steel, S - High-temperature alloysMID number5983908Mill ProfileN - General Purpose Cutter Type for Low to High Resistance MaterialsNeck diameter - inch (DN)1.2402Neck diameter - millimeter (DN)31.5Ordering code ANSIC11032.0Overall length - inch (OAL)4.4094Overall length - millimeter (OAL)112Peripheral effective cutting edge count (ZEFP)2Radial rake angle (GAMF)12ShankWeldon shank DIN 1835BUsable Length - millimeter (LU)51.5
Specifications
| Basic Standard | DIN 327 D |
| Coating | Bright |
| Connection diameter - inch (DCON MS) | 1.2598 |
| Connection diameter - millimeter (DCON MS) | 32 |
| Connection diameter tolerance machine side (TCDCONMS) | h6 |
| Cut length | Extra short |
| Cutting diameter - inch (DC) | 1.2598 |
| Cutting diameter - millimeter (DC) | 32 |
| Cutting diameter tolerance class (TCDC) | e8 |
| Depth of cut maximum - inch (APMX) | 1.2598 |
| Depth of cut maximum - millimeter (APMX) | 32 |
| EDP number | 353417 |
| Flute count (NOF) | 2 |
| Flute helix angle (FHA) | 30 |
| Material | HSS-E-PM |
| Material application | N - Non-ferrous metals, P - Steel and cast steel, S - High-temperature alloys |
| MID number | 5983908 |
| Mill Profile | N - General Purpose Cutter Type for Low to High Resistance Materials |
| Neck diameter - inch (DN) | 1.2402 |
| Neck diameter - millimeter (DN) | 31.5 |
| Ordering code ANSI | C11032.0 |
| Overall length - inch (OAL) | 4.4094 |
| Overall length - millimeter (OAL) | 112 |
| Peripheral effective cutting edge count (ZEFP) | 2 |
| Radial rake angle (GAMF) | 12 |
| Shank | Weldon shank DIN 1835B |
| Usable Length - millimeter (LU) | 51.5 |
5983908
