Dormer S6115.0 8030275 End Mill
- Write a review
$57.35
Basic StandardDORMERCoatingPolishedConnection diameter - inch (DCON MS)0.2362Connection diameter - millimeter (DCON MS)6Coolant supply property (CSP)0Corner radius - inch (RE)0.0039Corner radius - millimeter (RE)0.1Cut lengthShortCutting diameter - inch (DC)0.1969Cutting diameter - millimeter (DC)5Cutting diameter tolerance class (TCDC)h9Cutting pitch differential (CPDF)0Depth of cut maximum - inch (APMX)0.5906Depth of cut maximum - millimeter (APMX)15EDP number8030275Flute count (NOF)2Flute helix angle (FHA)30Flute helix unequal0MaterialHMMaterial applicationN - Non-ferrous metalsMID number8030275Mill ProfileW - Non-ferrous Cutter Type for Soft Malleable MaterialsNeck diameter - inch (DN)0.1811Neck diameter - millimeter (DN)4.6Ordering code ANSIS6115.0Overall length - inch (OAL)1.9685Overall length - millimeter (OAL)50Radial rake angle (GAMF)20ShankCylindrical shank DIN 6535 HAUsable Length - millimeter (LU)20
Specifications
| Basic Standard | DORMER |
| Coating | Polished |
| Connection diameter - inch (DCON MS) | 0.2362 |
| Connection diameter - millimeter (DCON MS) | 6 |
| Coolant supply property (CSP) | 0 |
| Corner radius - inch (RE) | 0.0039 |
| Corner radius - millimeter (RE) | 0.1 |
| Cut length | Short |
| Cutting diameter - inch (DC) | 0.1969 |
| Cutting diameter - millimeter (DC) | 5 |
| Cutting diameter tolerance class (TCDC) | h9 |
| Cutting pitch differential (CPDF) | 0 |
| Depth of cut maximum - inch (APMX) | 0.5906 |
| Depth of cut maximum - millimeter (APMX) | 15 |
| EDP number | 8030275 |
| Flute count (NOF) | 2 |
| Flute helix angle (FHA) | 30 |
| Flute helix unequal | 0 |
| Material | HM |
| Material application | N - Non-ferrous metals |
| MID number | 8030275 |
| Mill Profile | W - Non-ferrous Cutter Type for Soft Malleable Materials |
| Neck diameter - inch (DN) | 0.1811 |
| Neck diameter - millimeter (DN) | 4.6 |
| Ordering code ANSI | S6115.0 |
| Overall length - inch (OAL) | 1.9685 |
| Overall length - millimeter (OAL) | 50 |
| Radial rake angle (GAMF) | 20 |
| Shank | Cylindrical shank DIN 6535 HA |
| Usable Length - millimeter (LU) | 20 |
8030275
