Dormer E5471NO1 5976357 G(BSP) Machine Tap Straight Flute 4FL 1 inch x 11
- Write a review
$195.10
Basic StandardISO 2284Clamping Length - millimeter (LSC)24Clamping width - fractional inch (WSC)20Clamping width - inch0.7874CoatingBrightConnection diameter - inch (DCON MS)0.9843Connection diameter - millimeter (DCON MS)25Coolant supply property (CSP)33.249EDP number157312Flute count (NOF)4Flute Geometry (FDC)Straight Flute GeometryHand (Cutting direction)RightMaterialHSSMaterial applicationP - Steel and cast steelMID number5976357Ordering code ANSIE5471NO1Overall length - inch (OAL)4.2913Overall length - millimeter (OAL)109Premachined hole diameter - inch (PHD)1.2106Premachined hole diameter - millimeter (PHD)30.75ShankCylindrical shank with SquareThread diameter - inch (TD)1.309Thread diameter - millimeter (TD)33.249Thread diameter size (TDZ)1"Thread form (THFT)G - British standard pipe fastening - G seriesThreading length - inch (THL)1.2992Threading length - millimeter (THL)33Threads per inch (TPI)11Usable length (ULDR)1.5
Specifications
| Basic Standard | ISO 2284 |
| Clamping Length - millimeter (LSC) | 24 |
| Clamping width - fractional inch (WSC) | 20 |
| Clamping width - inch | 0.7874 |
| Coating | Bright |
| Connection diameter - inch (DCON MS) | 0.9843 |
| Connection diameter - millimeter (DCON MS) | 25 |
| Coolant supply property (CSP) | 33.249 |
| EDP number | 157312 |
| Flute count (NOF) | 4 |
| Flute Geometry (FDC) | Straight Flute Geometry |
| Hand (Cutting direction) | Right |
| Material | HSS |
| Material application | P - Steel and cast steel |
| MID number | 5976357 |
| Ordering code ANSI | E5471NO1 |
| Overall length - inch (OAL) | 4.2913 |
| Overall length - millimeter (OAL) | 109 |
| Premachined hole diameter - inch (PHD) | 1.2106 |
| Premachined hole diameter - millimeter (PHD) | 30.75 |
| Shank | Cylindrical shank with Square |
| Thread diameter - inch (TD) | 1.309 |
| Thread diameter - millimeter (TD) | 33.249 |
| Thread diameter size (TDZ) | 1" |
| Thread form (THFT) | G - British standard pipe fastening - G series |
| Threading length - inch (THL) | 1.2992 |
| Threading length - millimeter (THL) | 33 |
| Threads per inch (TPI) | 11 |
| Usable length (ULDR) | 1.5 |
5976357
