Dormer E250M6 5975865 M Machine Tap Straight Flute DIN 376 3FL M6 x 1.00 mm
- Write a review
$17.51
Basic StandardDIN 376Clamping Length - millimeter (LSC)6Clamping width - fractional inch (WSC)3.4Clamping width - inch0.1339CoatingBrightConnection diameter - inch (DCON MS)0.1772Connection diameter - millimeter (DCON MS)4.5EDP number87152Flute count (NOF)3Flute Geometry (FDC)Straight Flute GeometryHand (Cutting direction)RightMaterialHSS-E-PMMaterial applicationN - Non-ferrous metals, P - Steel and cast steelMID number5975865Ordering code ANSIE250M6Overall length - inch (OAL)3.1496Overall length - millimeter (OAL)80Premachined hole diameter - inch (PHD)0.1969Premachined hole diameter - millimeter (PHD)5ShankCylindrical shank with SquareTap chamfer style (TCS)C 2 - 3Thread diameter size (TDZ)6Thread form (THFT)M - Metric coarseThread pitch - inch (TP)0.0394Thread pitch - millimeter (TP)1Threading length - inch (THL)0.5906Threading length - millimeter (THL)15Usable length (ULDR)1.5
Specifications
| Basic Standard | DIN 376 |
| Clamping Length - millimeter (LSC) | 6 |
| Clamping width - fractional inch (WSC) | 3.4 |
| Clamping width - inch | 0.1339 |
| Coating | Bright |
| Connection diameter - inch (DCON MS) | 0.1772 |
| Connection diameter - millimeter (DCON MS) | 4.5 |
| EDP number | 87152 |
| Flute count (NOF) | 3 |
| Flute Geometry (FDC) | Straight Flute Geometry |
| Hand (Cutting direction) | Right |
| Material | HSS-E-PM |
| Material application | N - Non-ferrous metals, P - Steel and cast steel |
| MID number | 5975865 |
| Ordering code ANSI | E250M6 |
| Overall length - inch (OAL) | 3.1496 |
| Overall length - millimeter (OAL) | 80 |
| Premachined hole diameter - inch (PHD) | 0.1969 |
| Premachined hole diameter - millimeter (PHD) | 5 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | C 2 - 3 |
| Thread diameter size (TDZ) | 6 |
| Thread form (THFT) | M - Metric coarse |
| Thread pitch - inch (TP) | 0.0394 |
| Thread pitch - millimeter (TP) | 1 |
| Threading length - inch (THL) | 0.5906 |
| Threading length - millimeter (THL) | 15 |
| Usable length (ULDR) | 1.5 |
5975865
