Pramet SPKR 42EDSR:M9340 6754604 Milling Insert - Face
- Write a review
$10.86
ChipbreakerWith chipbreaker -no designationCoatingM9340Coating processMT-CVDCoating property (CTP)1Cooling effectVery negative effect on tool life - cooling is not recommendedCutting edge length - inch (L)0.5Cutting edge length - millimeter (L)12.7Depth of cut maximum - inch (APMX)0.354Depth of cut maximum - millimeter (APMX)9Depth of cut minimum - inch (APMN)0.039Depth of cut minimum - millimeter (APMN)1Feed maximal - millimeter0.23Feed minimal - millimeter0.15Feed_MAX_IMP_NUM0.009Feed_MIN_IMP_NUM0.006Inscribed circle diameter - inch (IC)0.5Inscribed circle diameter - millimeter (IC)12.7Insert thickness - inch (S)0.125Insert thickness - millimeter (S)3.18m-dimension - inch (M)0.035m-dimension - millimeter (M)0.9
Specifications
| Chipbreaker | With chipbreaker -no designation |
| Coating | M9340 |
| Coating process | MT-CVD |
| Coating property (CTP) | 1 |
| Cooling effect | Very negative effect on tool life - cooling is not recommended |
| Cutting edge length - inch (L) | 0.5 |
| Cutting edge length - millimeter (L) | 12.7 |
| Depth of cut maximum - inch (APMX) | 0.354 |
| Depth of cut maximum - millimeter (APMX) | 9 |
| Depth of cut minimum - inch (APMN) | 0.039 |
| Depth of cut minimum - millimeter (APMN) | 1 |
| Feed maximal - millimeter | 0.23 |
| Feed minimal - millimeter | 0.15 |
| Feed_MAX_IMP_NUM | 0.009 |
| Feed_MIN_IMP_NUM | 0.006 |
| Inscribed circle diameter - inch (IC) | 0.5 |
| Inscribed circle diameter - millimeter (IC) | 12.7 |
| Insert thickness - inch (S) | 0.125 |
| Insert thickness - millimeter (S) | 3.18 |
| m-dimension - inch (M) | 0.035 |
| m-dimension - millimeter (M) | 0.9 |
SPKR 42EDSR:M9340
