Dormer S6114.0XD4 8030273 End Mill
- Write a review
$56.17
Basic StandardDORMERCoatingPolishedConnection diameter - inch (DCON MS)0.1575Connection diameter - millimeter (DCON MS)4Coolant supply property (CSP)0Corner radius - inch (RE)0.0039Corner radius - millimeter (RE)0.1Cut lengthShortCutting diameter - inch (DC)0.1575Cutting diameter - millimeter (DC)4Cutting diameter tolerance class (TCDC)h9Cutting pitch differential (CPDF)0Depth of cut maximum - inch (APMX)0.4724Depth of cut maximum - millimeter (APMX)12EDP number8030273Flute count (NOF)2Flute helix angle (FHA)30Flute helix unequal0MaterialHMMaterial applicationN - Non-ferrous metalsMID number8030273Mill ProfileW - Non-ferrous Cutter Type for Soft Malleable MaterialsNeck diameter - inch (DN)0.1457Neck diameter - millimeter (DN)3.7Ordering code ANSIS6114.0XD4Overall length - inch (OAL)1.9685Overall length - millimeter (OAL)50Radial rake angle (GAMF)20ShankCylindrical shank DIN 6535 HAUsable Length - millimeter (LU)20
Specifications
| Basic Standard | DORMER |
| Coating | Polished |
| Connection diameter - inch (DCON MS) | 0.1575 |
| Connection diameter - millimeter (DCON MS) | 4 |
| Coolant supply property (CSP) | 0 |
| Corner radius - inch (RE) | 0.0039 |
| Corner radius - millimeter (RE) | 0.1 |
| Cut length | Short |
| Cutting diameter - inch (DC) | 0.1575 |
| Cutting diameter - millimeter (DC) | 4 |
| Cutting diameter tolerance class (TCDC) | h9 |
| Cutting pitch differential (CPDF) | 0 |
| Depth of cut maximum - inch (APMX) | 0.4724 |
| Depth of cut maximum - millimeter (APMX) | 12 |
| EDP number | 8030273 |
| Flute count (NOF) | 2 |
| Flute helix angle (FHA) | 30 |
| Flute helix unequal | 0 |
| Material | HM |
| Material application | N - Non-ferrous metals |
| MID number | 8030273 |
| Mill Profile | W - Non-ferrous Cutter Type for Soft Malleable Materials |
| Neck diameter - inch (DN) | 0.1457 |
| Neck diameter - millimeter (DN) | 3.7 |
| Ordering code ANSI | S6114.0XD4 |
| Overall length - inch (OAL) | 1.9685 |
| Overall length - millimeter (OAL) | 50 |
| Radial rake angle (GAMF) | 20 |
| Shank | Cylindrical shank DIN 6535 HA |
| Usable Length - millimeter (LU) | 20 |
8030273
