Dormer EX413/4 5973915 G(BSP) Machine Tap Spiral Flute 45° 4FL 3/4 inch x 14
- Write a review
$176.53
Basic StandardDIN 5156Clamping Length - millimeter (LSC)19Clamping width - inch0.6299Clamping width - millimeter (WSC)26.441CoatingSteam TemperedConnection diameter - inch (DCON MS)20Connection diameter - millimeter (DCON MS)16EDP number168707Flute count (NOF)4Flute Geometry (FDC)Spiral Flute GeometryFlute helix angle (FHA)45Hand (Cutting direction)RightMaterialHSS-E-PMMaterial applicationP - Steel and cast steelMID number5973915Ordering code ANSIEX413/4Overall length - inch (OAL)5.5118Overall length - millimeter (OAL)140Premachined hole diameter - inch (PHD)0.9646Premachined hole diameter - millimeter (PHD)45ShankCylindrical shank with SquareTap chamfer style (TCS)C 2 - 3Thread diameter - inch (TD)1.041Thread diameter - millimeter (TD)24.5Thread diameter size (TDZ)3/4Thread form (THFT)G - British standard pipe fastening - G seriesThreading length - inch (THL)0.7874Threading length - millimeter (THL)20Threads per inch (TPI)14Usable length (ULDR)2.5
Specifications
| Basic Standard | DIN 5156 |
| Clamping Length - millimeter (LSC) | 19 |
| Clamping width - inch | 0.6299 |
| Clamping width - millimeter (WSC) | 26.441 |
| Coating | Steam Tempered |
| Connection diameter - inch (DCON MS) | 20 |
| Connection diameter - millimeter (DCON MS) | 16 |
| EDP number | 168707 |
| Flute count (NOF) | 4 |
| Flute Geometry (FDC) | Spiral Flute Geometry |
| Flute helix angle (FHA) | 45 |
| Hand (Cutting direction) | Right |
| Material | HSS-E-PM |
| Material application | P - Steel and cast steel |
| MID number | 5973915 |
| Ordering code ANSI | EX413/4 |
| Overall length - inch (OAL) | 5.5118 |
| Overall length - millimeter (OAL) | 140 |
| Premachined hole diameter - inch (PHD) | 0.9646 |
| Premachined hole diameter - millimeter (PHD) | 45 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | C 2 - 3 |
| Thread diameter - inch (TD) | 1.041 |
| Thread diameter - millimeter (TD) | 24.5 |
| Thread diameter size (TDZ) | 3/4 |
| Thread form (THFT) | G - British standard pipe fastening - G series |
| Threading length - inch (THL) | 0.7874 |
| Threading length - millimeter (THL) | 20 |
| Threads per inch (TPI) | 14 |
| Usable length (ULDR) | 2.5 |
5973915