Dormer E260M8 6554504 Machine Tap Spiral Flute 45° Back Tapered Red Shark 3FL M8 x 1.25 mm
- Write a review
$30.24
Basic StandardDIN 371Clamping Length - millimeter (LSC)9Clamping width - inch0.2441Clamping width - millimeter (WSC)6.2CoatingBrightConnection diameter - inch (DCON MS)8Connection diameter - millimeter (DCON MS)6.2EDP number46554504Flute count (NOF)3Flute Geometry (FDC)Spiral Flute GeometryFlute helix angle (FHA)45Hand (Cutting direction)RightMaterialHSS-E-PMMaterial applicationP - Steel and cast steelMID number6554504Ordering code ANSIE260M8Overall length - inch (OAL)3.5433Overall length - millimeter (OAL)90Premachined hole diameter - inch (PHD)0.2677Premachined hole diameter - millimeter (PHD)45ShankCylindrical shank with SquareTap chamfer style (TCS)C 2 - 3Thread diameter - millimeter (TD)6.8Thread diameter size (TDZ)8Thread form (THFT)M - Metric coarseThread pitch - inch (TP)0.0492Thread pitch - millimeter (TP)1.25Threading length - inch (THL)0.4724Threading length - millimeter (THL)12Usable length (ULDR)2.5Usable Length - inch (LU)1.378Usable Length - millimeter (LU)35
Specifications
| Basic Standard | DIN 371 |
| Clamping Length - millimeter (LSC) | 9 |
| Clamping width - inch | 0.2441 |
| Clamping width - millimeter (WSC) | 6.2 |
| Coating | Bright |
| Connection diameter - inch (DCON MS) | 8 |
| Connection diameter - millimeter (DCON MS) | 6.2 |
| EDP number | 46554504 |
| Flute count (NOF) | 3 |
| Flute Geometry (FDC) | Spiral Flute Geometry |
| Flute helix angle (FHA) | 45 |
| Hand (Cutting direction) | Right |
| Material | HSS-E-PM |
| Material application | P - Steel and cast steel |
| MID number | 6554504 |
| Ordering code ANSI | E260M8 |
| Overall length - inch (OAL) | 3.5433 |
| Overall length - millimeter (OAL) | 90 |
| Premachined hole diameter - inch (PHD) | 0.2677 |
| Premachined hole diameter - millimeter (PHD) | 45 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | C 2 - 3 |
| Thread diameter - millimeter (TD) | 6.8 |
| Thread diameter size (TDZ) | 8 |
| Thread form (THFT) | M - Metric coarse |
| Thread pitch - inch (TP) | 0.0492 |
| Thread pitch - millimeter (TP) | 1.25 |
| Threading length - inch (THL) | 0.4724 |
| Threading length - millimeter (THL) | 12 |
| Usable length (ULDR) | 2.5 |
| Usable Length - inch (LU) | 1.378 |
| Usable Length - millimeter (LU) | 35 |
6554504