Dormer C29530.0 5983851 End Mill N 844 L 30.00 mm
- Write a review
$307.00
Basic StandardDIN 844 LCoatingTiCNCoating property (CTP)1Connection diameter - inch (DCON MS)0.9843Connection diameter - millimeter (DCON MS)25Cut lengthLongCutting diameter - inch (DC)1.1811Cutting diameter - millimeter (DC)30Cutting diameter tolerance class (TCDC)k10Depth of cut maximum - inch (APMX)3.5433Depth of cut maximum - millimeter (APMX)90EDP number355237Flute count (NOF)6Flute helix angle (FHA)30MaterialHSS-E-PMMaterial applicationK - Cast iron, N - Non-ferrous metals, P - Steel and cast steel, S - High-temperature alloysMID number5983851Mill ProfileN - General Purpose Cutter Type for Low to High Resistance MaterialsNeck diameter - inch (DN)0.9646Neck diameter - millimeter (DN)24.5Ordering code ANSIC29530.0Overall length - inch (OAL)6.5354Overall length - millimeter (OAL)166Peripheral effective cutting edge count (ZEFP)6Radial rake angle (GAMF)12ShankWeldon shank DIN 1835BUsable Length - millimeter (LU)109.5
Specifications
| Basic Standard | DIN 844 L |
| Coating | TiCN |
| Coating property (CTP) | 1 |
| Connection diameter - inch (DCON MS) | 0.9843 |
| Connection diameter - millimeter (DCON MS) | 25 |
| Cut length | Long |
| Cutting diameter - inch (DC) | 1.1811 |
| Cutting diameter - millimeter (DC) | 30 |
| Cutting diameter tolerance class (TCDC) | k10 |
| Depth of cut maximum - inch (APMX) | 3.5433 |
| Depth of cut maximum - millimeter (APMX) | 90 |
| EDP number | 355237 |
| Flute count (NOF) | 6 |
| Flute helix angle (FHA) | 30 |
| Material | HSS-E-PM |
| Material application | K - Cast iron, N - Non-ferrous metals, P - Steel and cast steel, S - High-temperature alloys |
| MID number | 5983851 |
| Mill Profile | N - General Purpose Cutter Type for Low to High Resistance Materials |
| Neck diameter - inch (DN) | 0.9646 |
| Neck diameter - millimeter (DN) | 24.5 |
| Ordering code ANSI | C29530.0 |
| Overall length - inch (OAL) | 6.5354 |
| Overall length - millimeter (OAL) | 166 |
| Peripheral effective cutting edge count (ZEFP) | 6 |
| Radial rake angle (GAMF) | 12 |
| Shank | Weldon shank DIN 1835B |
| Usable Length - millimeter (LU) | 109.5 |
5983851
