Pramet DNMG 442-NMR:T9315 7038077 Turning Insert - Negative
- Write a review
$16.38
ChipbreakerNMRCoatingT9315Coating processMT-CVDCoating property (CTP)1Cooling effectPositive effect on tool life - cooling is recommendedCorner radius - inch (RE)0.031Corner radius - millimeter (RE)0.8Cutting edge length - inch (L)0.61Cutting edge length - millimeter (L)15.5Depth of cut maximum - inch (APMX)0.157Depth of cut maximum - millimeter (APMX)4Depth of cut minimum - inch (APMN)0.031Depth of cut minimum - millimeter (APMN)0.8Feed maximal - millimeter0.48Feed minimal - millimeter0.2Feed_MAX_IMP_NUM0.019Feed_MIN_IMP_NUM0.008Fixing hole diameter - inch (D1)0.203Fixing hole diameter - millimeter (D1)5.16Inscribed circle diameter - inch (IC)0.5Inscribed circle diameter - millimeter (IC)12.7Insert thickness - millimeter (S)6.35
Specifications
| Chipbreaker | NMR |
| Coating | T9315 |
| Coating process | MT-CVD |
| Coating property (CTP) | 1 |
| Cooling effect | Positive effect on tool life - cooling is recommended |
| Corner radius - inch (RE) | 0.031 |
| Corner radius - millimeter (RE) | 0.8 |
| Cutting edge length - inch (L) | 0.61 |
| Cutting edge length - millimeter (L) | 15.5 |
| Depth of cut maximum - inch (APMX) | 0.157 |
| Depth of cut maximum - millimeter (APMX) | 4 |
| Depth of cut minimum - inch (APMN) | 0.031 |
| Depth of cut minimum - millimeter (APMN) | 0.8 |
| Feed maximal - millimeter | 0.48 |
| Feed minimal - millimeter | 0.2 |
| Feed_MAX_IMP_NUM | 0.019 |
| Feed_MIN_IMP_NUM | 0.008 |
| Fixing hole diameter - inch (D1) | 0.203 |
| Fixing hole diameter - millimeter (D1) | 5.16 |
| Inscribed circle diameter - inch (IC) | 0.5 |
| Inscribed circle diameter - millimeter (IC) | 12.7 |
| Insert thickness - millimeter (S) | 6.35 |
DNMG 442-NMR:T9315
