Dormer C42832.0 5984940 Roughing End Mill 32.00 mm
- Write a review
$367.84
Basic StandardDIN 844 KCoatingALCRONACoating property (CTP)1Connection diameter - inch (DCON MS)1.2598Connection diameter - millimeter (DCON MS)32Cut lengthShortCutting diameter - inch (DC)1.2598Cutting diameter - millimeter (DC)32Cutting diameter tolerance class (TCDC)k12Depth of cut maximum - inch (APMX)2.0866Depth of cut maximum - millimeter (APMX)53EDP number70086Flute count (NOF)6Flute helix angle (FHA)35MaterialHSS-E-PMMID number5984940Mill ProfileHRA - Fine Pitch Asymmetrical Rounded Profile ChipbreakerNeck diameter - inch (DN)1.2402Neck diameter - millimeter (DN)31.5Ordering code ANSIC42832.0Overall length - inch (OAL)5.2362Overall length - millimeter (OAL)133Peripheral effective cutting edge count (ZEFP)6Radial rake angle (GAMF)12ShankWeldon shank DIN 1835BUsable Length - millimeter (LU)72.5
Specifications
| Basic Standard | DIN 844 K |
| Coating | ALCRONA |
| Coating property (CTP) | 1 |
| Connection diameter - inch (DCON MS) | 1.2598 |
| Connection diameter - millimeter (DCON MS) | 32 |
| Cut length | Short |
| Cutting diameter - inch (DC) | 1.2598 |
| Cutting diameter - millimeter (DC) | 32 |
| Cutting diameter tolerance class (TCDC) | k12 |
| Depth of cut maximum - inch (APMX) | 2.0866 |
| Depth of cut maximum - millimeter (APMX) | 53 |
| EDP number | 70086 |
| Flute count (NOF) | 6 |
| Flute helix angle (FHA) | 35 |
| Material | HSS-E-PM |
| MID number | 5984940 |
| Mill Profile | HRA - Fine Pitch Asymmetrical Rounded Profile Chipbreaker |
| Neck diameter - inch (DN) | 1.2402 |
| Neck diameter - millimeter (DN) | 31.5 |
| Ordering code ANSI | C42832.0 |
| Overall length - inch (OAL) | 5.2362 |
| Overall length - millimeter (OAL) | 133 |
| Peripheral effective cutting edge count (ZEFP) | 6 |
| Radial rake angle (GAMF) | 12 |
| Shank | Weldon shank DIN 1835B |
| Usable Length - millimeter (LU) | 72.5 |
5984940
