Pramet 100E4R394C100-ISBN10-C 7455294 End Milling Cutter - High Feed
- Write a review
$350.62
Axial rake angle (GAMP)-9Clamping Type Code (MTP)Screw clamping through holeConnection diameter - inch (DCON MS)1Connection diameter - millimeter (DCON MS)25.4Coolant supply property (CSP)1Cutting diameter - inch (DC)0.74Cutting diameter - millimeter (DC)18.8Cutting diameter maximum - inch (DCX)1Cutting diameter maximum - millimeter (DCX)25.4Cutting pitch differential (CPDF)1Hand (Cutting direction)RightOverall length - inch (OAL)7.087Overall length - millimeter (OAL)180Peripheral effective cutting edge count (ZEFP)4Radial rake angle (GAMF)-10Rotational speed maximum (RPMX)24600ShankCylindrical shank DIN 1835ATool cutting edge angle (KAPR)20Usable Length - inch (LU)3.937
Specifications
| Axial rake angle (GAMP) | -9 |
| Clamping Type Code (MTP) | Screw clamping through hole |
| Connection diameter - inch (DCON MS) | 1 |
| Connection diameter - millimeter (DCON MS) | 25.4 |
| Coolant supply property (CSP) | 1 |
| Cutting diameter - inch (DC) | 0.74 |
| Cutting diameter - millimeter (DC) | 18.8 |
| Cutting diameter maximum - inch (DCX) | 1 |
| Cutting diameter maximum - millimeter (DCX) | 25.4 |
| Cutting pitch differential (CPDF) | 1 |
| Hand (Cutting direction) | Right |
| Overall length - inch (OAL) | 7.087 |
| Overall length - millimeter (OAL) | 180 |
| Peripheral effective cutting edge count (ZEFP) | 4 |
| Radial rake angle (GAMF) | -10 |
| Rotational speed maximum (RPMX) | 24600 |
| Shank | Cylindrical shank DIN 1835A |
| Tool cutting edge angle (KAPR) | 20 |
| Usable Length - inch (LU) | 3.937 |
7455294
