Dormer E252M24 5975449 Machine Tap Straight Flute White Shark 4FL M24 x 3.00 mm
- Write a review
$84.24
Basic StandardDIN 376Clamping Length - millimeter (LSC)17Clamping width - fractional inch (WSC)14.5Clamping width - inch0.5709CoatingSteam TemperedConnection diameter - inch (DCON MS)0.7087Connection diameter - millimeter (DCON MS)18EDP number87336Flute count (NOF)4Flute Geometry (FDC)Straight Flute GeometryHand (Cutting direction)RightMaterialHSS-E-PMMaterial applicationK - Cast iron, N - Non-ferrous metalsMID number5975449Ordering code ANSIE252M24Overall length - inch (OAL)6.2992Overall length - millimeter (OAL)160Premachined hole diameter - inch (PHD)0.8268Premachined hole diameter - millimeter (PHD)21ShankCylindrical shank with SquareTap chamfer style (TCS)C 2 - 3Thread diameter size (TDZ)24Thread form (THFT)M - Metric coarseThread pitch - inch (TP)0.1181Thread pitch - millimeter (TP)3Threading length - inch (THL)1.4961Threading length - millimeter (THL)38Tolerance limitD8Usable length (ULDR)2
Specifications
| Basic Standard | DIN 376 |
| Clamping Length - millimeter (LSC) | 17 |
| Clamping width - fractional inch (WSC) | 14.5 |
| Clamping width - inch | 0.5709 |
| Coating | Steam Tempered |
| Connection diameter - inch (DCON MS) | 0.7087 |
| Connection diameter - millimeter (DCON MS) | 18 |
| EDP number | 87336 |
| Flute count (NOF) | 4 |
| Flute Geometry (FDC) | Straight Flute Geometry |
| Hand (Cutting direction) | Right |
| Material | HSS-E-PM |
| Material application | K - Cast iron, N - Non-ferrous metals |
| MID number | 5975449 |
| Ordering code ANSI | E252M24 |
| Overall length - inch (OAL) | 6.2992 |
| Overall length - millimeter (OAL) | 160 |
| Premachined hole diameter - inch (PHD) | 0.8268 |
| Premachined hole diameter - millimeter (PHD) | 21 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | C 2 - 3 |
| Thread diameter size (TDZ) | 24 |
| Thread form (THFT) | M - Metric coarse |
| Thread pitch - inch (TP) | 0.1181 |
| Thread pitch - millimeter (TP) | 3 |
| Threading length - inch (THL) | 1.4961 |
| Threading length - millimeter (THL) | 38 |
| Tolerance limit | D8 |
| Usable length (ULDR) | 2 |
5975449
