Pramet SPKR 53EDSR:M8340 6803604 Milling Insert - Face
- Write a review
$13.66
ChipbreakerWith chipbreaker -no designationCoatingM8340Coating processPVDCoating property (CTP)1Cutting edge length - inch (L)0.625Cutting edge length - millimeter (L)15.875Depth of cut maximum - inch (APMX)0.472Depth of cut maximum - millimeter (APMX)12Depth of cut minimum - inch (APMN)0.039Depth of cut minimum - millimeter (APMN)1Feed maximal - millimeter0.45Feed minimal - millimeter0.25Feed_MAX_IMP_NUM0.018Feed_MIN_IMP_NUM0.01Inscribed circle diameter - inch (IC)0.625Inscribed circle diameter - millimeter (IC)15.875Insert thickness - inch (S)0.187Insert thickness - millimeter (S)4.76m-dimension - inch (M)0.048m-dimension - millimeter (M)1.22
Specifications
| Chipbreaker | With chipbreaker -no designation |
| Coating | M8340 |
| Coating process | PVD |
| Coating property (CTP) | 1 |
| Cutting edge length - inch (L) | 0.625 |
| Cutting edge length - millimeter (L) | 15.875 |
| Depth of cut maximum - inch (APMX) | 0.472 |
| Depth of cut maximum - millimeter (APMX) | 12 |
| Depth of cut minimum - inch (APMN) | 0.039 |
| Depth of cut minimum - millimeter (APMN) | 1 |
| Feed maximal - millimeter | 0.45 |
| Feed minimal - millimeter | 0.25 |
| Feed_MAX_IMP_NUM | 0.018 |
| Feed_MIN_IMP_NUM | 0.01 |
| Inscribed circle diameter - inch (IC) | 0.625 |
| Inscribed circle diameter - millimeter (IC) | 15.875 |
| Insert thickness - inch (S) | 0.187 |
| Insert thickness - millimeter (S) | 4.76 |
| m-dimension - inch (M) | 0.048 |
| m-dimension - millimeter (M) | 1.22 |
6803604
