Pramet LNGX 120508SR-MM:M6330 6925526 Milling Insert - Square Shoulder
- Write a review
$17.54
Coating0.008Coating process0.003Coating property (CTP)1Cooling effectMMCorner radius - inch (RE)M6330Corner radius - millimeter (RE)PVDCutting edge length - inch (L)0.472Cutting edge length - millimeter (L)12Depth of cut maximum - inch (APMX)0.354Depth of cut maximum - millimeter (APMX)9Feed maximal - millimeter0.2Feed minimal - millimeter0.08Feed_MAX_IMP_NUM0.012Feed_MIN_IMP_NUM0.3Fixing hole diameter - inch (D1)0.177Fixing hole diameter - millimeter (D1)4.5Insert cutting diameter - millimeter (CDI)5.96Insert diameter - inch (INSD)0.374Insert diameter - millimeter (INSD)9.5Insert shape code (SC)L - rectangularInsert thickness - inch (S)0.8Insert thickness - millimeter (S)5.96Insert width - inch (W1)0.374Insert width - millimeter (W1)9.5Major cutting edge angle (KRINS)0.031Wiper edge length - inch (BS)Slightly negative effect on tool life
Specifications
| Coating | 0.008 |
| Coating process | 0.003 |
| Coating property (CTP) | 1 |
| Cooling effect | MM |
| Corner radius - inch (RE) | M6330 |
| Corner radius - millimeter (RE) | PVD |
| Cutting edge length - inch (L) | 0.472 |
| Cutting edge length - millimeter (L) | 12 |
| Depth of cut maximum - inch (APMX) | 0.354 |
| Depth of cut maximum - millimeter (APMX) | 9 |
| Feed maximal - millimeter | 0.2 |
| Feed minimal - millimeter | 0.08 |
| Feed_MAX_IMP_NUM | 0.012 |
| Feed_MIN_IMP_NUM | 0.3 |
| Fixing hole diameter - inch (D1) | 0.177 |
| Fixing hole diameter - millimeter (D1) | 4.5 |
| Insert cutting diameter - millimeter (CDI) | 5.96 |
| Insert diameter - inch (INSD) | 0.374 |
| Insert diameter - millimeter (INSD) | 9.5 |
| Insert shape code (SC) | L - rectangular |
| Insert thickness - inch (S) | 0.8 |
| Insert thickness - millimeter (S) | 5.96 |
| Insert width - inch (W1) | 0.374 |
| Insert width - millimeter (W1) | 9.5 |
| Major cutting edge angle (KRINS) | 0.031 |
| Wiper edge length - inch (BS) | Slightly negative effect on tool life |
6925526
