Dormer S7131.5 7002449 End Mill 1.50 mm
- Write a review
$40.60
Basic StandardDORMERCoatingAlCrNCoating property (CTP)1Connection diameter - inch (DCON MS)0.1575Connection diameter - millimeter (DCON MS)4Cut lengthShortCutting diameter - inch (DC)0.0591Cutting diameter - millimeter (DC)1.5Cutting diameter tolerance class (TCDC)h9Depth of cut maximum - inch (APMX)0.1772Depth of cut maximum - millimeter (APMX)4.5EDP number47002449Flute count (NOF)3Flute helix angle (FHA)40MaterialHMMaterial applicationK - Cast iron, M - Stainless steel, P - Steel and cast steel, S - High-temperature alloysMID number7002449Mill ProfileN - General Purpose Cutter Type for Low to High Resistance MaterialsOrdering code ANSIS7131.5Overall length - inch (OAL)1.5748Overall length - millimeter (OAL)40Peripheral effective cutting edge count (ZEFP)3Radial rake angle (GAMF)10ShankCylindrical shank DIN 6535 HA
Specifications
| Basic Standard | DORMER |
| Coating | AlCrN |
| Coating property (CTP) | 1 |
| Connection diameter - inch (DCON MS) | 0.1575 |
| Connection diameter - millimeter (DCON MS) | 4 |
| Cut length | Short |
| Cutting diameter - inch (DC) | 0.0591 |
| Cutting diameter - millimeter (DC) | 1.5 |
| Cutting diameter tolerance class (TCDC) | h9 |
| Depth of cut maximum - inch (APMX) | 0.1772 |
| Depth of cut maximum - millimeter (APMX) | 4.5 |
| EDP number | 47002449 |
| Flute count (NOF) | 3 |
| Flute helix angle (FHA) | 40 |
| Material | HM |
| Material application | K - Cast iron, M - Stainless steel, P - Steel and cast steel, S - High-temperature alloys |
| MID number | 7002449 |
| Mill Profile | N - General Purpose Cutter Type for Low to High Resistance Materials |
| Ordering code ANSI | S7131.5 |
| Overall length - inch (OAL) | 1.5748 |
| Overall length - millimeter (OAL) | 40 |
| Peripheral effective cutting edge count (ZEFP) | 3 |
| Radial rake angle (GAMF) | 10 |
| Shank | Cylindrical shank DIN 6535 HA |
7002449
