Pramet CNMM 543-NR2:T9315 6922877 Turning Insert - Negative
- Write a review
$16.38
ChipbreakerNR2CoatingT9315Coating processMT-CVDCoating property (CTP)1Cooling effectPositive effect on tool life - cooling is recommendedCorner radius - inch (RE)0.047Corner radius - millimeter (RE)1.2Cutting edge length - inch (L)0.634Cutting edge length - millimeter (L)16.1Depth of cut maximum - inch (APMX)0.374Depth of cut maximum - millimeter (APMX)9.5Depth of cut minimum - inch (APMN)0.059Depth of cut minimum - millimeter (APMN)1.5Feed maximal - millimeter0.65Feed minimal - millimeter0.35Feed_MAX_IMP_NUM0.026Feed_MIN_IMP_NUM0.014Fixing hole diameter - inch (D1)0.25Fixing hole diameter - millimeter (D1)6.35Inscribed circle diameter - inch (IC)0.625Inscribed circle diameter - millimeter (IC)15.875Insert thickness - millimeter (S)6.35
Specifications
| Chipbreaker | NR2 |
| Coating | T9315 |
| Coating process | MT-CVD |
| Coating property (CTP) | 1 |
| Cooling effect | Positive effect on tool life - cooling is recommended |
| Corner radius - inch (RE) | 0.047 |
| Corner radius - millimeter (RE) | 1.2 |
| Cutting edge length - inch (L) | 0.634 |
| Cutting edge length - millimeter (L) | 16.1 |
| Depth of cut maximum - inch (APMX) | 0.374 |
| Depth of cut maximum - millimeter (APMX) | 9.5 |
| Depth of cut minimum - inch (APMN) | 0.059 |
| Depth of cut minimum - millimeter (APMN) | 1.5 |
| Feed maximal - millimeter | 0.65 |
| Feed minimal - millimeter | 0.35 |
| Feed_MAX_IMP_NUM | 0.026 |
| Feed_MIN_IMP_NUM | 0.014 |
| Fixing hole diameter - inch (D1) | 0.25 |
| Fixing hole diameter - millimeter (D1) | 6.35 |
| Inscribed circle diameter - inch (IC) | 0.625 |
| Inscribed circle diameter - millimeter (IC) | 15.875 |
| Insert thickness - millimeter (S) | 6.35 |
CNMM 543-NR2:T9315
