Dormer S5214.0XR0.3 6706671 Corner Radius End Mill 4.00 mm x 0.3 mm
- Write a review
$77.56
Basic StandardDORMERCoatingTiSiNCoating property (CTP)1Connection diameter - inch (DCON MS)0.2362Connection diameter - millimeter (DCON MS)6Corner radius - inch (RE)0.0118Corner radius - millimeter (RE)0.3Cut lengthExtra shortCutting diameter - inch (DC)0.1575Cutting diameter - millimeter (DC)4Cutting diameter tolerance class (TCDC)h9Depth of cut maximum - inch (APMX)0.1969Depth of cut maximum - millimeter (APMX)5EDP number46706671Flute count (NOF)4Flute helix angle (FHA)45MaterialHMMaterial applicationH - Hardened materialsMID number6706671Mill ProfileN - General Purpose Cutter Type for Low to High Resistance MaterialsNeck diameter - inch (DN)0.1457Neck diameter - millimeter (DN)3.7Ordering code ANSIS5214.0XR0.3Overall length - inch (OAL)2.3622Overall length - millimeter (OAL)60Peripheral effective cutting edge count (ZEFP)4Radial rake angle (GAMF)-10ShankCylindrical shank DIN 6535 HAUsable Length - millimeter (LU)16
Specifications
| Basic Standard | DORMER |
| Coating | TiSiN |
| Coating property (CTP) | 1 |
| Connection diameter - inch (DCON MS) | 0.2362 |
| Connection diameter - millimeter (DCON MS) | 6 |
| Corner radius - inch (RE) | 0.0118 |
| Corner radius - millimeter (RE) | 0.3 |
| Cut length | Extra short |
| Cutting diameter - inch (DC) | 0.1575 |
| Cutting diameter - millimeter (DC) | 4 |
| Cutting diameter tolerance class (TCDC) | h9 |
| Depth of cut maximum - inch (APMX) | 0.1969 |
| Depth of cut maximum - millimeter (APMX) | 5 |
| EDP number | 46706671 |
| Flute count (NOF) | 4 |
| Flute helix angle (FHA) | 45 |
| Material | HM |
| Material application | H - Hardened materials |
| MID number | 6706671 |
| Mill Profile | N - General Purpose Cutter Type for Low to High Resistance Materials |
| Neck diameter - inch (DN) | 0.1457 |
| Neck diameter - millimeter (DN) | 3.7 |
| Ordering code ANSI | S5214.0XR0.3 |
| Overall length - inch (OAL) | 2.3622 |
| Overall length - millimeter (OAL) | 60 |
| Peripheral effective cutting edge count (ZEFP) | 4 |
| Radial rake angle (GAMF) | -10 |
| Shank | Cylindrical shank DIN 6535 HA |
| Usable Length - millimeter (LU) | 16 |
6706671
