Pramet 25N2R042B25-SHN06C-C 6760283 End Milling Cutter - Face
- Write a review
$371.19
Axial rake angle (GAMP)-7Clamping Type Code (MTP)Screw clamping through holeConnection diameter - inch (DCON MS)0.984Connection diameter - millimeter (DCON MS)25Coolant supply property (CSP)1Cutting diameter - inch (DC)0.984Cutting diameter - millimeter (DC)25Cutting diameter maximum - inch (DCX)1.268Cutting diameter maximum - millimeter (DCX)32.2Hand (Cutting direction)RightInsert index count (NOI)2Overall length - inch (OAL)3.898Overall length - millimeter (OAL)99Peripheral effective cutting edge count (ZEFP)2Radial rake angle (GAMF)-7Rotational speed maximum (RPMX)17400ShankWeldon shank DIN 1835BUsable Length - millimeter (LU)42
Specifications
| Axial rake angle (GAMP) | -7 |
| Clamping Type Code (MTP) | Screw clamping through hole |
| Connection diameter - inch (DCON MS) | 0.984 |
| Connection diameter - millimeter (DCON MS) | 25 |
| Coolant supply property (CSP) | 1 |
| Cutting diameter - inch (DC) | 0.984 |
| Cutting diameter - millimeter (DC) | 25 |
| Cutting diameter maximum - inch (DCX) | 1.268 |
| Cutting diameter maximum - millimeter (DCX) | 32.2 |
| Hand (Cutting direction) | Right |
| Insert index count (NOI) | 2 |
| Overall length - inch (OAL) | 3.898 |
| Overall length - millimeter (OAL) | 99 |
| Peripheral effective cutting edge count (ZEFP) | 2 |
| Radial rake angle (GAMF) | -7 |
| Rotational speed maximum (RPMX) | 17400 |
| Shank | Weldon shank DIN 1835B |
| Usable Length - millimeter (LU) | 42 |
6760283
