Dormer E8093/8 7350475 Machine Tap Yellow Shark for Low Alloy Steels Plug Style 3FL 3/8 inch x 16
- Write a review
$25.38
Basic StandardDIN/ANSIClamping width - inch0.284CoatingTiAlN/TopCoating property (CTP)1Connection diameter - inch (DCON MS)0.381Connection diameter - millimeter (DCON MS)9.68EDP number7350475Flute count (NOF)3Flute Geometry (FDC)Spiral Point GeometryHand (Cutting direction)RightMaterialHSS-E-PMMaterial applicationN - Non-ferrous metals, P - Steel and cast steelMID number7350475Ordering code ANSIE8093/8Overall length - inch (OAL)3.937Overall length - millimeter (OAL)0.381Premachined hole diameter - imperial (PHD)5/16Premachined hole diameter - inch (PHD)0.315Premachined hole diameter - millimeter (PHD)8ShankCylindrical shank with SquareTap chamfer style (TCS)B 3.5 - 5Thread diameter - millimeter (TD)5/16Thread diameter size (TDZ)3/8Thread form (THFT)UNC - Unified CoarseThreading length - inch (THL)0.787Threads per inch (TPI)16Tolerance limitH4Usable length (ULDR)2.5Usable Length - inch (LU)1.535
Specifications
| Basic Standard | DIN/ANSI |
| Clamping width - inch | 0.284 |
| Coating | TiAlN/Top |
| Coating property (CTP) | 1 |
| Connection diameter - inch (DCON MS) | 0.381 |
| Connection diameter - millimeter (DCON MS) | 9.68 |
| EDP number | 7350475 |
| Flute count (NOF) | 3 |
| Flute Geometry (FDC) | Spiral Point Geometry |
| Hand (Cutting direction) | Right |
| Material | HSS-E-PM |
| Material application | N - Non-ferrous metals, P - Steel and cast steel |
| MID number | 7350475 |
| Ordering code ANSI | E8093/8 |
| Overall length - inch (OAL) | 3.937 |
| Overall length - millimeter (OAL) | 0.381 |
| Premachined hole diameter - imperial (PHD) | 5/16 |
| Premachined hole diameter - inch (PHD) | 0.315 |
| Premachined hole diameter - millimeter (PHD) | 8 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | B 3.5 - 5 |
| Thread diameter - millimeter (TD) | 5/16 |
| Thread diameter size (TDZ) | 3/8 |
| Thread form (THFT) | UNC - Unified Coarse |
| Threading length - inch (THL) | 0.787 |
| Threads per inch (TPI) | 16 |
| Tolerance limit | H4 |
| Usable length (ULDR) | 2.5 |
| Usable Length - inch (LU) | 1.535 |
7350475