Pramet VCGT 333F-AL:T0315 6756178 Turning Insert - Positive
- Write a review
$19.99
ChipbreakerALCoatingT0315Coating processPVDCoating property (CTP)1Cooling effectPositive effect on tool life - cooling is recommendedCorner radius - inch (RE)0.047Corner radius - millimeter (RE)1.2Cutting edge length - inch (L)0.654Cutting edge length - millimeter (L)16.6Depth of cut maximum - inch (APMX)0.157Depth of cut maximum - millimeter (APMX)4Depth of cut minimum - inch (APMN)0.047Depth of cut minimum - millimeter (APMN)1.2Feed maximal - millimeter0.6Feed minimal - millimeter0.15Feed_MAX_IMP_NUM0.024Feed_MIN_IMP_NUM0.006Fixing hole diameter - inch (D1)0.173Fixing hole diameter - millimeter (D1)4.4Inscribed circle diameter - inch (IC)0.375Inscribed circle diameter - millimeter (IC)9.525Insert thickness - millimeter (S)4.76
Specifications
| Chipbreaker | AL |
| Coating | T0315 |
| Coating process | PVD |
| Coating property (CTP) | 1 |
| Cooling effect | Positive effect on tool life - cooling is recommended |
| Corner radius - inch (RE) | 0.047 |
| Corner radius - millimeter (RE) | 1.2 |
| Cutting edge length - inch (L) | 0.654 |
| Cutting edge length - millimeter (L) | 16.6 |
| Depth of cut maximum - inch (APMX) | 0.157 |
| Depth of cut maximum - millimeter (APMX) | 4 |
| Depth of cut minimum - inch (APMN) | 0.047 |
| Depth of cut minimum - millimeter (APMN) | 1.2 |
| Feed maximal - millimeter | 0.6 |
| Feed minimal - millimeter | 0.15 |
| Feed_MAX_IMP_NUM | 0.024 |
| Feed_MIN_IMP_NUM | 0.006 |
| Fixing hole diameter - inch (D1) | 0.173 |
| Fixing hole diameter - millimeter (D1) | 4.4 |
| Inscribed circle diameter - inch (IC) | 0.375 |
| Inscribed circle diameter - millimeter (IC) | 9.525 |
| Insert thickness - millimeter (S) | 4.76 |
6756178
