Dormer R45715/64 5979114 140° Coolant Drill 15/64 inch
- Write a review
$127.68
ApplicationAngleIcon_DICT_SELDrill point 140°Basic StandardDIN 6537 KCoatingTiAlNCoating property (CTP)1Connection diameter - inch (DCON MS)0.2362Connection diameter - millimeter (DCON MS)6Connection diameter tolerance machine side (TCDCONMS)h6Coolant supply property (CSP)1Cutting diameter - fractional inch (DC)15/64Cutting diameter - inch (DC)0.2344Cutting diameter - millimeter (DC)5.95Cutting diameter tolerance class (TCDC)m7EDP number624500Hand (Cutting direction)RightLength chip flute - inch (LCF)1.1024Length chip flute - millimeter (LCF)28MaterialHMMID number5979114Ordering code ANSIR45715/64Overall length - inch (OAL)2.5984Overall length - millimeter (OAL)66Point Angle (SIG)140ShankCylindrical shank DIN 6535 HAShank length - millimeter (LS)36Spiral formCTWUsable length (ULDR)3
Specifications
| ApplicationAngleIcon_DICT_SEL | Drill point 140° |
| Basic Standard | DIN 6537 K |
| Coating | TiAlN |
| Coating property (CTP) | 1 |
| Connection diameter - inch (DCON MS) | 0.2362 |
| Connection diameter - millimeter (DCON MS) | 6 |
| Connection diameter tolerance machine side (TCDCONMS) | h6 |
| Coolant supply property (CSP) | 1 |
| Cutting diameter - fractional inch (DC) | 15/64 |
| Cutting diameter - inch (DC) | 0.2344 |
| Cutting diameter - millimeter (DC) | 5.95 |
| Cutting diameter tolerance class (TCDC) | m7 |
| EDP number | 624500 |
| Hand (Cutting direction) | Right |
| Length chip flute - inch (LCF) | 1.1024 |
| Length chip flute - millimeter (LCF) | 28 |
| Material | HM |
| MID number | 5979114 |
| Ordering code ANSI | R45715/64 |
| Overall length - inch (OAL) | 2.5984 |
| Overall length - millimeter (OAL) | 66 |
| Point Angle (SIG) | 140 |
| Shank | Cylindrical shank DIN 6535 HA |
| Shank length - millimeter (LS) | 36 |
| Spiral form | CTW |
| Usable length (ULDR) | 3 |
5979114
