Pramet SNMM 868-HR2:T9335 7036363 Turning Insert - Negative
- Write a review
$46.62
ChipbreakerHR2CoatingT9335Coating processMT-CVDCoating property (CTP)1Cooling effectVery positive effect on tool life - cooling is recommendedCorner radius - inch (RE)0.126Corner radius - millimeter (RE)3.2Cutting edge length - inch (L)1Cutting edge length - millimeter (L)25.4Depth of cut maximum - inch (APMX)0.63Depth of cut maximum - millimeter (APMX)16Depth of cut minimum - inch (APMN)0.126Depth of cut minimum - millimeter (APMN)3.2Feed maximal - millimeter1.4Feed minimal - millimeter0.7Feed_MAX_IMP_NUM0.055Feed_MIN_IMP_NUM0.028Fixing hole diameter - inch (D1)0.359Fixing hole diameter - millimeter (D1)9.12Inscribed circle diameter - inch (IC)1Inscribed circle diameter - millimeter (IC)25.4Insert thickness - millimeter (S)9.525
Specifications
| Chipbreaker | HR2 |
| Coating | T9335 |
| Coating process | MT-CVD |
| Coating property (CTP) | 1 |
| Cooling effect | Very positive effect on tool life - cooling is recommended |
| Corner radius - inch (RE) | 0.126 |
| Corner radius - millimeter (RE) | 3.2 |
| Cutting edge length - inch (L) | 1 |
| Cutting edge length - millimeter (L) | 25.4 |
| Depth of cut maximum - inch (APMX) | 0.63 |
| Depth of cut maximum - millimeter (APMX) | 16 |
| Depth of cut minimum - inch (APMN) | 0.126 |
| Depth of cut minimum - millimeter (APMN) | 3.2 |
| Feed maximal - millimeter | 1.4 |
| Feed minimal - millimeter | 0.7 |
| Feed_MAX_IMP_NUM | 0.055 |
| Feed_MIN_IMP_NUM | 0.028 |
| Fixing hole diameter - inch (D1) | 0.359 |
| Fixing hole diameter - millimeter (D1) | 9.12 |
| Inscribed circle diameter - inch (IC) | 1 |
| Inscribed circle diameter - millimeter (IC) | 25.4 |
| Insert thickness - millimeter (S) | 9.525 |
7036363
