Dormer EP403/4 5973947 G(BSP) Machine Tap Spiral Point 4FL 3/4 inch x 14
- Write a review
$171.98
Basic StandardDIN 5156Clamping Length - millimeter (LSC)19Clamping width - fractional inch (WSC)16Clamping width - inch0.6299CoatingBrightConnection diameter - inch (DCON MS)20Coolant supply property (CSP)26.441EDP number138632Flute count (NOF)4Flute Geometry (FDC)Spiral Point GeometryHand (Cutting direction)RightMaterialHSS-E-PMMaterial applicationN - Non-ferrous metals, P - Steel and cast steelMID number5973947Ordering code ANSIEP403/4Overall length - inch (OAL)5.5118Overall length - millimeter (OAL)140Premachined hole diameter - inch (PHD)0.9646Premachined hole diameter - millimeter (PHD)24.5ShankCylindrical shank with SquareTap chamfer style (TCS)B 3.5 - 5Thread diameter - inch (TD)1.041Thread diameter - millimeter (TD)26.441Thread diameter size (TDZ)3/4Thread form (THFT)G - British standard pipe fastening - G seriesThreading length - inch (THL)1.1024Threading length - millimeter (THL)28Threads per inch (TPI)14Usable length (ULDR)2.5
Specifications
| Basic Standard | DIN 5156 |
| Clamping Length - millimeter (LSC) | 19 |
| Clamping width - fractional inch (WSC) | 16 |
| Clamping width - inch | 0.6299 |
| Coating | Bright |
| Connection diameter - inch (DCON MS) | 20 |
| Coolant supply property (CSP) | 26.441 |
| EDP number | 138632 |
| Flute count (NOF) | 4 |
| Flute Geometry (FDC) | Spiral Point Geometry |
| Hand (Cutting direction) | Right |
| Material | HSS-E-PM |
| Material application | N - Non-ferrous metals, P - Steel and cast steel |
| MID number | 5973947 |
| Ordering code ANSI | EP403/4 |
| Overall length - inch (OAL) | 5.5118 |
| Overall length - millimeter (OAL) | 140 |
| Premachined hole diameter - inch (PHD) | 0.9646 |
| Premachined hole diameter - millimeter (PHD) | 24.5 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | B 3.5 - 5 |
| Thread diameter - inch (TD) | 1.041 |
| Thread diameter - millimeter (TD) | 26.441 |
| Thread diameter size (TDZ) | 3/4 |
| Thread form (THFT) | G - British standard pipe fastening - G series |
| Threading length - inch (THL) | 1.1024 |
| Threading length - millimeter (THL) | 28 |
| Threads per inch (TPI) | 14 |
| Usable length (ULDR) | 2.5 |
5973947
