Dormer EP318-36 5973927 UNF Machine Tap Spiral Point 3FL No.8 x 36
- Write a review
$35.65
Basic StandardDIN 2184-1Clamping Length - millimeter (LSC)8Clamping width - fractional inch (WSC)3.4Clamping width - inch0.1339CoatingSteam TemperedConnection diameter - inch (DCON MS)4.5Coolant supply property (CSP)4.166EDP number138472Flute count (NOF)3Flute Geometry (FDC)Spiral Point GeometryHand (Cutting direction)RightMaterialHSS-E-PMMaterial applicationP - Steel and cast steelMID number5973927Ordering code ANSIEP318-36Overall length - inch (OAL)2.4803Overall length - millimeter (OAL)63Premachined hole diameter - inch (PHD)0.1378Premachined hole diameter - millimeter (PHD)3.5ShankCylindrical shank with SquareTap chamfer style (TCS)C 2 - 3Thread diameter - inch (TD)0.164Thread diameter - millimeter (TD)4.166Thread diameter size (TDZ)8Thread form (THFT)UNF - Unified FineThreading length - inch (THL)0.4724Threading length - millimeter (THL)12Threads per inch (TPI)36Tolerance limitH3Usable length (ULDR)2.5Usable Length - inch (LU)0.8268Usable Length - millimeter (LU)21
Specifications
| Basic Standard | DIN 2184-1 |
| Clamping Length - millimeter (LSC) | 8 |
| Clamping width - fractional inch (WSC) | 3.4 |
| Clamping width - inch | 0.1339 |
| Coating | Steam Tempered |
| Connection diameter - inch (DCON MS) | 4.5 |
| Coolant supply property (CSP) | 4.166 |
| EDP number | 138472 |
| Flute count (NOF) | 3 |
| Flute Geometry (FDC) | Spiral Point Geometry |
| Hand (Cutting direction) | Right |
| Material | HSS-E-PM |
| Material application | P - Steel and cast steel |
| MID number | 5973927 |
| Ordering code ANSI | EP318-36 |
| Overall length - inch (OAL) | 2.4803 |
| Overall length - millimeter (OAL) | 63 |
| Premachined hole diameter - inch (PHD) | 0.1378 |
| Premachined hole diameter - millimeter (PHD) | 3.5 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | C 2 - 3 |
| Thread diameter - inch (TD) | 0.164 |
| Thread diameter - millimeter (TD) | 4.166 |
| Thread diameter size (TDZ) | 8 |
| Thread form (THFT) | UNF - Unified Fine |
| Threading length - inch (THL) | 0.4724 |
| Threading length - millimeter (THL) | 12 |
| Threads per inch (TPI) | 36 |
| Tolerance limit | H3 |
| Usable length (ULDR) | 2.5 |
| Usable Length - inch (LU) | 0.8268 |
| Usable Length - millimeter (LU) | 21 |
5973927
